| Sensors and Detectors > Environmental Sensors > Moisture / Flood Detectors | ![]() |
||
![]()
| |||
GE Security 5501-M Moisture Detection Processor
GE Security 5501-M Moisture Detection ProcessorProcessor for moisture sensor, closed loop, terminal connection, accommodates up to 4 sensors, includes two long-life lithium batteries, mahogany brown |
5515 Moisture Sensor
Works With Model 5501 Processor
WB-200 Waterbug Moisture and Flood Detector
WB-200 Waterbug from Winland Electronics
Waterbug - 12 or 24 VAC or VDC (WB-200)
The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output
that can be connected to alarm panels, bells, dialers, etc. Unit can monitor
as many as six sensor probes, up to 100 feet away. Each sensor probe has two
contacts. When a film of water forms a bridge between these contacts, the unit
senses this and triggers the alarm output. The sensor will not alarm due to
condensation or high humidity. One standard surface sensor is included with
the unit.
1040 Standard Water Probe
Winland 1040 Standard Water Probe |
1041 Under Carpet Water Probe
Winland 1041 Under Carpet Water Probe |
WB-800 Waterbug: 8-Zones
WB-800 Waterbug: 8-Zones from Winland Electronics
The model WB-800 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch and eight LEDs on console to identify the sensor in alarm. As many as eight supervised sensor probes can be run up to 500 feet away (or 16 non-supervised sensors). Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. Four standard surface sensors are included with the unit.









