FBII FB-XL4760SDT Multiplex smoke detector

• Connects directly to XL4 and XL5 via 2-wire bus
• Low profile design
• Multiplex addressable loop device
• Integral heat sensor
• Simple 2 wire installation
• Tamper resistant
• DIP switch for programming the address

ESL 350 Smoke Alarm 120VAC w/ Back-up Battery - GE Sensors

The ESL 320A/350 Series alarms are single/multiple station photoelectric 120VAC smoke alarms. Because of its low profile, this series is ideal for use in residential occupancies, including hotels, motels and dormitories.

GE Secuity ESL350CC Smoke Detector 120VAC with Relay and 9 Volt Battery

• Backward compatible with existing ESL 320 wiring
• Field replaceable optical chamber for quick and easy maintenance
• Test/silence button
• Battery backup on 350 models ensures continuous protection
• Low profile design blends in with any environment
• Up to 12 units can be interconnected
• Built-in 85dB temporal sounder

ESL 429 Smoke Detectors Direct Wire 2 Wire - GE Sensors

The 429 Series self-diagnostic, two-wire smoke detectors continually monitor their own sensitivity and operational status, and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics. They meet NFPA 72 field sensitivity testing requirements without the need for external meters.

449CRT Smoke Detector with 135º Heat Sensor: 4 Wire - GE Sensors

The 400 Series self-diagnostic, four-wire smoke detectors continually monitor their own sensitivity and operational status and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics. They meet NFPA 72 field sensitivity testing requirements without the need for external meters.

449 Smoke Detectors Direct Wire 4 Wire - GE Sensors

The 400 Series self-diagnostic, four-wire smoke detectors continually monitor their own sensitivity and operational status and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics. They meet NFPA 72 field sensitivity testing requirements without the need for external meters.

449CT Smoke Detector with 135º Heat Sensor: 4 Wire - GE Sensors

The 400 Series self-diagnostic, four-wire smoke detectors continually monitor their own sensitivity and operational status and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics. They meet NFPA 72 field sensitivity testing requirements without the need for external meters.

ESL 521-BXT Smoke Detectors - GE Sensors

The ESL 500N series 2&4 wire conventional photoelectric smoke detectors bring together trusted technology and a full line of needed features to meet the demands of every type of application. The 500N offers sounders in 2&4 wire applications, specifically to meet residential code requirements. The 521NCSXT has the added benefit of low current draw which makes it compatible with a wide variety of control panels. The ESL 500N series also offers choices for optional auxiliary relays and isolated heat sensors, not available before in the ESL 500 series. ESL is proud to offer proven technology like CleanMe®, dust compensation, field replaceable optical chambers, multi-criteria heat algorithms and self-diagnostics which are trusted by installers around the globe.

CSFM, cULus, MEA

701U Smoke Detector H&B Bases - GE Sensors

• Wire clamp-type terminals
• Built-in continuity switch
• Break-off anti-tamper latch

711U Smoke Detector H&B Head - GE Sensors

UL, FM, California State Fire Marshal Approved & MEA (New York City) Approved

ESL 429-AT Photoelectric Smoke Detector with 135º Heat Detector and Audible Alarm

The 429 Series self-diagnostic, two-wire smoke detectors continually monitor their own sensitivity and operational status, and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics. They meet NFPA 72 field sensitivity testing requirements without the need for external meters.

Gentex 917-0015-002 Photoelectric Smoke & Heat Detector

Photoelectric Smoke Alarm for 120VAC/9VDC Single or Multiple (Tandem) Station and Specialty Applications

120VAC photoelectric smoke alarm/detector with 9VDC battery back-up as an auxiliary power source in the event of an electrical failure. Features a warning signal for low or missing battery. Applications include homes and apartments, as well as hospitals, hotels and nursing homes per UL 217, UL1730, applicable UBC/UFC and IBC/IFC Standards and NFPA 72, Chapter 2.

Firewolf FW-2 Advanced Photoelectric Smoke Detectors

• The FW-2 2-wire smoke detectors more accurately detect all types of fires for performance superior to previous photoelectric detectors.
• They come in attractive, low-profile, baseless units with dual LEDs for 360ƒ visibility.
• The detectors are 100% burn-in tested
• Enable precision detection of even minute particles.

Firewolf FW-4 Advanced Photoelectric Smoke Detectors

• The FW-4 4-wire smoke detectors more accurately detect all types of fires for performance superior to previous photoelectric detectors.
• They come in attractive, low-profile, baseless units with dual LEDs for 360ƒ visibility.
• The detectors are 100% burn-in tested
• Enable precision detection of even minute particles.

4WITAR-B 4-Wire, Photoelectric I3 Smoke Detector: Thermal Sensor, Sounder, Form C Relay

The 4WITAR-B is a 4-wire, photoelectric i3 smoke detector with isolated thermal sensor, built-in sounder, and Form C relay.

4WTA-B 4-wire, Photoelectric i³ Smoke Detector
Thermal Sensor & Built-in Sounder

Series: i3 Conventional Detection
Type: Plug-in Smoke Detector
Model: 4WTA-B

4WTAR-B 4-Wire, Photoelectric I3 Smoke Detector: Thermal Sensor, Sounder & Form C Relay

The 4WTAR-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor, built-in sounder, and Form C relay.

System Sensor’s i3™ series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: Installation ease, Intelligence, and Instant inspection.

4WTR-B 4-Wire, Photoelectric I3 Smoke Detector: Thermal Sensor & Form C Relay

The 4WTR-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.

BEAM1224 Reflected Type Beam Smoke Detector

The BEAM1224 is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector.

System Sensor Model BEAM1224 is a 4-wire conventional projected beam smoke detector. It is uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain. It is to be used with UL Listed compatible control panels only. Installation of the single-ended reflective design is much easier than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a 2-digit signal strength meter incorporated into the product. Listed for operation from –22°F to 131°F, BEAM1224 can be used in open area applications to provide early warning in environments where temperature extremes exceed the capability of other types of smoke detection.

BEAM1224S Reflected Type Beam Smoke Detector with Built-In Sensitivity Test

The BEAM1224 is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector and an integral sensitivity test.

System Sensor Model BEAM1224 is a 4-wire conventional projected beam smoke detector. It is uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain. It is to be used with UL Listed compatible control panels only. Installation of the single-ended reflective design is much easier than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a 2-digit signal strength meter incorporated into the product. Listed for operation from –22°F to 131°F, BEAM1224 can be used in open area applications to provide early warning in environments where temperature extremes exceed the capability of other types of smoke detection.

System Sensor 2151 Low Profile, Plug-In Photoelectric Smoke Detector

Model 2151 (photoelectric sensor) and model 2151T (photoelectric sensor with thermal) can be used with a variety of adapter bases in several wiring configurations and voltages. Other features include: low current draw, stable performance in high air velocities, built-in tamper resistant base design, remote LED option, removable cover and built-in test switch.

System Sensor 2W-B Smoke Detector: 2-wire, I3 Series

Installation Ease. Intelligence. Instant Inspection. These are the guiding principles of System Sensor's i³ series of photoelectric smoke detectors. Designed to take conventional smoke detectors to a new level, these principles translate directly into significantly lower installation, testing and maintenance costs.

System Sensor 2WTA-B i³ Series Plug-in Smoke Detector with Built-In Thermal & Audible Sounder

The 2WTA-B is a 2-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.

System Sensor 2WT-B Smoke Detector: 2-wire with 135-degree Thermal Sensor, I3 Series

Installation Ease. Intelligence. Instant Inspection. These are the guiding principles of System Sensor's i³ series of photoelectric smoke detectors. Designed to take conventional smoke detectors to a new level, these principles translate directly into significantly lower installation, testing and maintenance costs.

2WTR-B 2-Wire, Photoelectric I3 Smoke Detector: Thermal Sensor And Form C Relay

The 2WTR-B is a 2-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.

System Sensor’s i3™ series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: Installation ease, Intelligence, and Instant inspection.