Russound SS-4.2 Speaker Selector

The SS-4.2 allows you to switch up to four speaker pairs connected to a stereo amplifier. Offering high-quality audio performance, it also provides overload protection and long-term reliability.

Russound SS-6.2 6 Pair Speaker Selector, High Power

The SS-6.2 allows you to switch up to six speaker pairs connected to a stereo amplifier. Offering high-quality audio performance, it also provides overload protection and long-term reliability.

Click for Details.

Russound PRO-6HP Six Speaker Pair, Two Amplifier Input Selector

The PRO-6HP is a robust, efficient dual-source speaker selector for up to six pairs of speakers. Designed for demanding applications, this high-quality speaker selector features a low-frequency protection circuit to reduce subsonic signals. This allows higher power operation without amplifier shutdown.

Click for Details

Russound PRO-8HP 8 Speaker Pair, 2 Amplifier Input Selector

The PRO-8HP is a robust, efficient dual-source speaker selector for up to eight pairs of speakers. Designed for demanding applications, this high-quality speaker selector features a low-frequency protection circuit to reduce subsonic signals. This allows higher power operation without amplifier shutdown.

Russound PRO-12HP Twelve Speaker Pair, 2 Amplifier Input Selector

The PRO-12HP is a robust, efficient dual-source speaker selector for up to 12 pairs of speakers. Designed for demanding applications, this high-quality speaker selector features a low-frequency protection circuit to reduce subsonic signals. This allows higher power operation without amplifier shutdown.

Russound SDB-2.1 Two-Source Two-Pair Speaker Selector: Zone Volume Control

The SDB-2.1 is a highly efficient dual-source speaker selector that controls two pairs of speakers. The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location.

Russound SDB-4.1 2-Source 4-Pair Speaker Selector: Zone Volume Control

The SDB-4.1 is a highly efficient dual-source speaker selector that controls up to four pairs of speakers. The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location.

Click for Details.

Russound SDB-6.1 Two-Source Six-Pair Speaker Selector: Zone Volume Control

The SDB-6.1 is a highly efficient dual-source speaker selector that controls up to six pairs of speakers. The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location.

Russound AB-1.2 In-Wall A/B Selector Switch with the Snap Connectors

The AB-1.2 allows for a single pair of speakers to be driven from either of two amplifiers. Its ease of installation and use make it particularly well suited for situations where a local source, such as stereo receiver, can play through the same set of speakers as the whole-house audio system. The AB-1.2 can also be used to select one of two sets of speakers to be driven from one amplifier.

Russound AB2.2 Speaker Selector

The Russound AB-3.2 Automatic A/B Selector is an affordable solution for automatically switching a pair of speakers between two amplified sources. This allows you to use one pair of speakers in a room for two different sources such as a television and a multiroom audio system.

Russound AB-3.2 Automatic A/B Selector Switch

The Russound AB-3.2 Automatic A/B Selector is an affordable solution for automatically switching a pair of speakers between two amplified sources. This allows you to use one pair of speakers in a room for two different sources such as a television and a multiroom audio system.

Click for Details.

Russound WB-1 Speaker Impedance Matching Device

The WB-1 Speaker Impedance Matching Device allows you to safely connect 4-ohm speakers to an amplifier that requires a minimum load impedance of 8 ohms. You can also use multiple WB-1s to match impedances when connecting multiple speaker pairs to an amplifier.

Click for Details.

Russound WCN-12 Impedance Matching Distribution Hub: 12 Pairs

The WCN-12 is an impedance-matching distribution device for up to 12 pairs of 4- to 8-ohm speakers. Using high-efficiency precision autoformers, it provides maximum available power to the speakers without overloading the amplifier.

Click for Details.

Russound AX-6 Six-Source Music Selector

The AX-6 Auxiliary Line Source Selector allows you to expand your audio system to accommodate more sources. This convenient tabletop device connects to a stereo line-level input on your receiver or preamplifier and provides inputs for six additional stereo source components, such as media players and tuners. You can then use the selector knob to select any attached source to play through your audio system.