The SIBT-M3T-25 fiber optic transmitter along with the SIBR-M3T-25 receiver provides a high-quality system for transporting up to five TV channels over a multimode optical fiber. With an RF bandwidth from 5 MHz to 250 MHz, these units can transmit sub-band, low-band, FM , mid-band or high-band channels. Optimum performance is achieved when the channel (frequency) plan is within a single octave of bandwidth. The system can transmit signals from a VCR, camcorder or cable television feed over a distance of 3 km on one multimode fiber. Tri-color LED's are used to indicate optimum RF input level on the transmitters and optical input status on the receivers. Green indicates an acceptable level, red is too high and amber is too low. These products are recommended for use with multimode fibers only and require a minimum fiber bandwidth of 250 MHz.

Features

• Low Cost
• 5-250 MHz RF bandwidth
• Up to Five Channels Over a Multimode Fiber
• Distance to 3 km

LINK @ 25 º C, Multi-mode Fiber

• Bandwidth: 5-250 MHz
• Operating Wavelength: 1310 nm
• CATV Channels: 5
• CNR (-7 dBm Input, 5 Ch. Load): 47 dB
• CSO (5 Ch. Load): -71 dB
• CTB (5 Ch. Load): -55 dB
• Input/Output Impedance: 75 Ohms
• Operating Temperature Range: +10 to +40 ºC
• Weight: 6 oz, 170 g (per unit)
• Physical Dimensions: SIBT (WxHxL): 3.75 x 2.95 x 1.12 in 146 x 74 x 28 mm

Transmitters

• RF Input Level (5 Channel): +6.0 dBmV
• Optical Output: -7 dBm
• Power Dissipation: 1.8 W

Receiver

• Optical Input Range: -16 to - 6 dBm
• Power Dissipation: 1.8 W
• Connectors Optical Output: ST™ RF Input: "F"

Power Supply

• SIBT/SIBR: ACCS-PS-90 (BT Stock No. 7417)

The SIBT-S3A-210 fiber optic transmitter along with the SIBR-S4A-210 receiver provides a high-quality system for transporting up to ten TV channels over a single mode optical fiber. With an RF bandwidth from 5 MHz to 250 MHz, these units can transmit subband, low-band, FM, mid-band or high-band channels. Optimum performance is achieved when the channel (frequency) plan is within a single octave of bandwidth. The system can transmit signals from a VCR, camcorder or cable television feed over a distance of 10 km on one single mode fiber. Tri-color LED's are used to indicate optimum RF input level on the transmitters and optical input status on the receivers. Green indicates an acceptable level, red is too high and amber is too low. These products are recommended for use with single mode fibers only and require a minimum fiber bandwidth of 500 MHz.

Features

• Low Cost
• Up To 10 Channels on One Single-mode Fiber
• 5-250 MHz RF bandwidth
• 1310nm Operation To 10 KM

LINK @ 25 º C, Single-mode Fiber

• Bandwidth: 5-250 MHz
• Operating Wavelength: 1310 nm
• CATV Channels: 10
• CNR (+1 dBm Input, 10 Ch. Load): 52 dB
• CSO (10 Ch. Load): -68 dB
• CTB (10 Ch. Load): -70 dB
• Input/Output Impedance: 75
• Operating Temperature Range: +10 to +40 ºC
• Weight: 6 oz, 170 g (per unit)
• Physical Dimensions: (WxHxL): 5.75 x 2.95 x 1.12 in, 146 x 74 x 28 mm

Transmitters

• RF Input Level (10 Channel): +7.0 dBmV
• Optical Output: +3 DBM
• Power Dissipation: 3.6 W

Receiver

• Optical Input Range: -9 to +4 dBm
• Power Dissipation: 2.0 W

Connectors

• Optical Output: FC/APC
• RF Input: "F"
• Power Supply: SIBT/SIBR: ACCS-PS-170 (BT Stock No. 7419)

The SIBT-S5A-425 fiber optic transmitter along with the SIBR-S4A-425 receiver provide a high-quality system for transporting up to twenty five TV channels over a single mode optical fiber. With an RF bandwidth from 5 MHz to 350 MHz, these units can transmit sub-band, low-band, FM, mid-band, highband or super-band channels. Optimum performance is achieved when the channel (frequency) plan is within a single octave of bandwidth. A possible channel plan for the twenty five channel link is TV channels G through AA (155 to 305 MHz). The system can transmit TV channels over a distance of 50 km at 1550nm on one single mode fiber. Tri-color LED's are used to indicate optimum RF input level on the transmitters and optical input status on the receivers. Green indicates an acceptable level, red is too high and amber is too low. These products are recommended for use with single mode fibers only and require a minimum fiber bandwidth of 500 MHz.

Features

• Up to Twenty Five Channels on One Single Mode Fiber
• Supports Transmission of Sub-band, Low-band, FM, Mid-band and High-band Channels
• Utilizes Inputs from Standard CATV VSB/AM Modulators, Processors, etc.
• 1550 nm Operation to 50 km
• Tri-color LED For Optimum Input Indication

LINK @ 25 º C, Single-mode Fiber

• Bandwidth: 5-350 MHz
• Operating Wavelength: 1550 nm
• CATV Channels: 25
• CNR (+1 dBm Input,25 Ch. Load): 52 dB
• CSO (25 Ch. Load): -68 dB
• CTB (25 Ch. Load): -70 dB
• Input/Output Impedance: 75
• Operating Temperature Range: +10 to +40 ºC
• Weight: 6 oz, 170 g (per unit)
• Physical Dimensions: SIBR (WxHxL): 5.75 x 2.95 x 1.12 in, 146 x 74 x 28 mm

Transmitters

• RF Input Level (25 Channel): +7.5 dBmV
• Optical Output: +4 dBm
• Power Dissipation: 3.6 W

Receiver

• Optical Input Range: -9 to +4.5 dBm
• Power Dissipation: 2.0 W

Connectors

• Optical Output: FC/APC
• RF Input: "F"
• Power Supply: SIBT/SIBR: ACCS-PS-170, (BT Stock No. 7419)

The SIAT-M3T/M8T/S3T/S5T transmitters, used with the SIAR-M8R/U4T-3 receivers, provide a high-quality system for transferring baseband video and stereo audio signals with complete EMI immunity via fiber optics. The transmitters accept one video and two unbalanced (600 or 10 k) audio inputs and combine them for transmission over a single optical fiber. The receivers accept the composite optical signal and convert it to a video and two unbalanced (600 or 10 k) audio outputs. This FM video/stereo audio fiber optic link offers near studio-quality performance in low-to-moderate optical loss applications.

Single mode and multimode fiber models are available. Because of the FM technique employed, no user adjustments are required over the full optical loss range. While optimum performance is achieved with an RS-250 C video input and 1-Volt RMS audio inputs, the output level tracks the input level over the full optical loss range. Used with a good quality optical fiber (0.5 dB/km @ 1310nm & 1000 MHz/km), the multimode version will function over more than 15 km of fiber, and the single mode version will function over more than 70 km.

Features

• FM Video/Unbalanced Stereo Audio Transmission Over Optical Fiber
• Meets and or exceeds RS-250C Medium Haul Specifications
• Single-mode or Multimode Versions Available
• Audio Bandwidth 50 Hz-20 KHz
• 0-15 dB Optical Loss Range with Multimode Fiber Using 1310nm Optics
• 0-23 dB Optical Loss Range with Single-Mode Fiber Using 1310nm or 1550nm