Audio Monitoring - Louroe > Remote Call Stations
Remote Call Stations

Remote Call Stations

Sound Activated Remote Call Stations - Models DCS and DCS-1 are remote call stations used with ALA and DG Series sound activated systems. These calls stations can activate the base station by a call button containing a 3 kHz oscillator or by sound that exceeds the threshold level through an electret condenser microphone (DCS-1 only).

Push Button Activated Remote Call Stations - Models DCS-12V, DCSM-12V, TLMC-12V, TLSP-PB-12V, RCS-1-12V, RCS-2-12V and RCS-6-12V are remote call stations, with a built-in pushbutton, that activate the LOUROE Alarming Base Station by triggering its alarm input. All of the push button activated remote call stations provide bi-directional audio communications with the Base Station, except Models DCS-12V and DCSM-12V.

IMPORTANT:This series of remote call stations is compatible only with the AP-4CS, AP-8CS, and AP-12CS Alarming Base Stations.


DCS Sound Activated Remote Call Station

DCS Sound Activated Remote Call Station

DCS Sound Activated Remote Call Station

Call button mounted in a single gang stainless steel face plate. Contains a 3 kHz oscillator to trigger the Louroe Base Station. Used in sound activated systems only, with ALA and DG Series Base Stations. Fits into a standard single gang housing (not included) for flush or surface mounting.




DCS-1 Sound Activated Remote Call Station

DCS-1 Sound Activated Remote Call Station

DCS-1 Sound Activated Remote Call Station

Call button and electret condenser microphone mounted in a single gang stainless steel face plate. Used in sound activated systems only, with ALA and DG Series Base Stations. Base station can be activated either by pushing the call button (containing a 3 kHz oscillator) or by sound that exceeds the threshold level set at the base station. Microphone also allows security personnel to monitor audio at the remote area. Fits standard single gang housing (not included), for flush or surface mounting.




DCS-12V Push Button Activated Remote Call Station

DCS-12V Push Button Activated Remote Call Station

DCS-12V Push Button Activated Remote Call Station

1" red call button mounted to a 2-gang stainless steel face plate. When button is pressed the base station is activated, identifying the zone. A relay contact (from base station) activates a camera or other annunciation. Fits standard two-gang electrical box (not included) for flush or surface mounting.




DCSM-12V Push Button Activated Remote Call Station

DCSM-12V Push Button Activated Remote Call Station

DCSM-12V Push Button Activated Remote Call Station

1" red call button mounted to a 2-gang stainless steel face plate. When button is pressed the base station is activated, identifying the zone. It also features a built-in electret condenser microphone for monitoring one-way audio at the remote area after the unit has been activated. A relay contact (from base station) activates a camera or other annunciation. Fits standard two-gang electrical box (not included) for flush or surface mounting.




RCS-2-12V Push Button Activated Remote Call Station

RCS-2-12V Push Button Activated Remote Call Station

RCS-2-12V Push Button Activated Remote Call Station

1 1/2" Red pushbutton, electret condenser microphone and 3" speaker mounted in a vandal resistant and weather resistant housing. When call button is pressed, the alarming base station is activated, identifying the zone location. Microphone and speaker provide bi-directional audio with the base station. A built-in LED is illuminated when call is acknowledged from the base station.