FS3/8-CD FloodStop for Sink/Basin
Prevent water damage from failed Sink/Basin and Supply Line:
Sink leaks are often small and go unnoticed until significant damage is finally discovered. Such a leak will continue to collect under the sink and then seep between the kitchen flooring and sub-flooring. The damage often goes undetected until the floor is visually buckled or warped, at which time the damage and cost to replace is extensive.
FloodStop (FS 3/8-CD) automatically shuts off the water supply to the sink, whether caused by a small continuous leak, broken component, leaking door seal, or a ruptured supply line. Easily installed in ten minutes. 5-Year Manufacturer's Warranty.
FloodStop (FS 3/8-CD) Components:
- Magnetic Latching Valve (3/8 inch Compression Fitting)
- Control Unit with Battery Backup (4 C)
- Water/Leak Sensor (1.25” X 7.5”)
- AC Power Adaptor
Additional Information
How FloodStop FS 3/8-CD Works:
- The FloodStop valve is connected to the angle stop and supply line
- Water/leak sensor is placed at the base of the appliance or fixture (Dishwasher – Sink – 3/8” Icemaker - Toilet – etc.)
- Valve stays open until water loss is detected
- Water on sensor closes FloodStop valve and sounds alarm
- Valve stays closed until problem is attended to and system is reset
Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is manually shut off.
With FloodStop, Property Damage is Avoided:
Water loss from unexpected appliance failures and hose ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.
|
