Silent Knight 5104 Fire Control Communicator: 6-Zones

The Silent Knight Model 5104 is a six-zone fire control communicator providing digital fire reporting over ordinary telephone lines, eliminating the need for costly leased lines. It’s UL 864 and NFPA 72 approved for monitoring local evacuation controls.

The Model 5104 is fully supervised. Its microprocessor constantly runs programs to monitor AC, standby battery, zone inputs and telephone line connections. If a fault condition is detected, it sounds a local trouble audible and reports the condition to the central station. If one of the telephone lines faults for more than 60 seconds, it will automatically switch to the other to report the failure.

The communicator will signal activation, restoration and trouble conditions on any of six inputs. If an application requires a different input configuration, the individual input styles may be changed by using a Model 7181 Fire Zone Converter Module. The 7181 also allows use of two-wire type smoke detectors, instead of the normal four-wire contact type, for automatic fire detection applications.

As a stand-alone unit, it can be used to monitor:

• Sprinkler systems for waterflow, supervisory, and gate valve tamper conditions.
• Automatic fire detection systems for structures that are not required to have a fire alarm system but want property protection (e.g. to call the fire department after hours).
• Monitors dry contact alarms, trouble and supervisory outputs, then transmits a separate code for each.

Features