Elk Products ELK-800 10 Watt Audio Amplifier
The ELK-800 is a great compact audio amplifier It may be connected to virtually any audio source, i.e. microphone, radio, computer sound card, telephone system paging output, etc., even an ordinary single line phone set. The audio source is amplified up to 10 watts, adjustable from an on-board volume control. Remotely installed, it saves money by requiring only 22 - 24 gauge telco or alarm type wire. It operates on 12 -24 volts AC or DC and has built in volume adjust. It can also drive multiple speakers.
Features:
- Expanded Telephone System Paging
- Does Not Require 25 or 70V Line Transformers
- Multiple Speaker Hookups
- Requires only 22-24 gauge telco wire
- Built-in Volume Control & Gain Select
- Compact Size
- Surface Mount ABS Enclosure with Snap-On Cover
- Lifetime Limited Warranty
- Operating Voltage: 12 to 24 Volts AC or DC **
- Current Draw: 38 - 800 mA, Depending on Load and Volume Setting
- Rated Output: 10 Watts **
- Output Speaker Load: 2 to 16 Ohms **
- Input Impedance: 1000 Ohms Nominal
- Audio Input Level: 15 dBm to +10 dBm
- Enclosure Size: 4.4" x 3" x 1.15" (111.8mm x 76.3mm x 29.2mm)
View the ELK-800 Instruction Manual in Adobe Acrobat format (right-click to save document to your hard drive)
**Note: The ELK-800 is primarily designed for short duration (intermittent) paging applications. For long durations, such as playing music, you may need to reduce the volume output, or lower the power input voltage, or lower the speaker loading in order to keep the ELK-800 from overloading and shutting down.
|
