|
Caddx NX-590E TCP/IP Interface Module from GE Interlogix
Overview
The NX-590E Network Module brings new functionality to
the world of controls with Ethernet connectivity to your central
station. Working in conjunction with the Osborne-Hoffman
Network Receiver, a direct pipe is established into your
current automation.
Outstanding Features
The NX-590E can send events to two IP address for dual, split,
or backup reporting. Events may also be sent to two e-mail
addresses. The NX controls can also be configured for dial or
cellular backup should network communication fail.
Triple-DES encryption is used to protect data from being
compromised. To further enhance network security, a dynamic
KEY generation is employed with a new 24-Bytes random number
generated for every event.
The NX-590E also offers the choice of static IP, where the IP
addresses are fixed and assigned by IS department; or DHCP,
where a pool of IP addresses is assigned by a server to units on
the network and IP addresses here can and do change. Either
way all functions are programmable via keypad or DL900
upload/download software.
Standard Features
- Up to 10,000 NX-590E's can be monitored on the Osborne-Hoffman Network Receiver
- Backwards compatible to all NetworX controls and resides in a 6-inch slot in the control cabinet
- Provides 10BT Ethernet connectivity with TCP/IP
- Video tagging on all events sent to Kalatel's DVMRE digital recorder and multiplexer to be stored with video on hard drive
- On-site or remote initiated download using DL900 software
- Code updates for the NX-590E can be downloaded and flashed into modules over network
- Uses SIA or Contact ID reporting formats
- User selectable polling time for full supervision
- Low current draw of 90 mA in standby and 120 mA during communication at 12 VDC from NX control
- Small bandwidth used with typical message 20 bytes
- Embedded web server with application links into NX control (available soon)
- PPP connectivity via onboard optional 2400 baud or user supplied modem (available soon)
|
