Description:

The GRI DPA-10 uses a microprocessor to monitor the CLOSED LOOP magnetic reed switch(es), shunt/cancel button, and battery voltage and provides the timing options. Model DPA-10 is set to alarm instantly if the protected door is opened before pressing the shunt/cancel button. Model DPA-10D is set to an initial seven second delay. In which case, the unit will wait 7 seconds upon door opening before alarming. In all cases, depressing the shunt/ cancel button will provide a maximum 15 second window of alarm deactivation and automatically reset upon expiration.

The GRI DPA-10 Series Pool Alarms operate on a 9 volt battery. U.L. requires that a Duracell alkaline battery Model MN1604 be used. Both units will operate at any voltage of 5-15 volts maximum. 12 volts is recommended to prevent sounder volume from dropping below minimum sound pressure levels of 85dB at 10’.

Features:

• Monitors Entry to Pool/Spa Areas
• Listed per U.L. 2017
• Microprocessor Controlled
• Battery Operated
• Low Battery Indicator
• Exceeds Operational Requirements of Model Barrier Codes
• Surface Mount

Application:

The GRI DPA-10 Series is designed as an aid to detect unsupervised access to a pool/spa area by a small child. Monitoring a door or window with a magnetic reed switch(es), the DPA-10 Series will sound an alarm should anyone too small to manage the adult pass through feature attempt entrance to the pool/spa area. For maximum protection all moveable openings should be protected in such a manner by the GRI DPA-10 Series. The self contained surface mounted alarm may easily be mounted to the wall of an existing structure.

Specifications:

• Battery Type 9 Volt Alkaline Duracell
• Model MN1604
• Typical Battery Life Approximately 3 to 6 months
• Low Battery Mode 8.5 V DC
• Mounting Height Ref. Local Code
• Sounder volume 85 dB at 10 Ft. (3.5 M)
• Switch Closed Loop

Part Numbers: