VDT14130WDM Digitally Encoded Video Transmitter with Bi-directional Data Channel

The IFS VDT14100WDM-AD series video transmitter and data transceiver supports simultaneous broadcast quality transmission of 10-bit digitally encoded video and bi-directional data over one multimode or singlemode optical fiber. The module is compatible with American Dynamics cameras and supports RS-422, Manchester, 2-wire RS-485, and Sensormatic "Sensornet" data interfaces, and most major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

Features

• 10-Bit Digitally Encoded Video Transmission
• Exceeds RS-250C Short-Haul Transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Supports RS-422, Manchester, Sensormatic "Sensornet", or RS-485 (2-wire) Data Interfaces
• No In-field Electrical or Optical Adjustments Required
• Integrated WDM for Greater Reliability
• Distances up to 32 Miles (51.5 km)
• Comprehensive Lifetime Warranty

Specifications

• VIDEO
  • Video Input: 1 volt pk-pk (75 ohms)
  • Video Bandwidth: 5 Hz - 10 MHz
  • Differential Gain: <2%
  • Differential Phase: <0.7º Tilt: <1%
  • Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss Budget
• DATA
  • Data Interface RS-422, Sensormatic "Sensonet", 2 wire RS-485 with Tri-State
  • Data Format: NRZ, RZI, Manchester, Bi-phase
  • Data Rate: DC-512 Kbps Bit Error Rate (BER): < 1 in 10-9@ Maximum Optical Loss Budget
  • Operating Mode: Simplex or Full-Duplex
• WAVELENGTH
  • 1310/1550 nm, Multimode
  • 1310/1550 nm, Singlemode
• OPTICAL EMITTER Laser Diode
• NUMBER OF FIBERS 1
• CONNECTORS
  • Power: Terminal Block with Screw Clamps or
  • Video: BNC (Gold Plated Center-Pin)
  • Data: Terminal Block with Screw Clamps
  • Optical: ST
• ELECTRICAL& MECHANICAL
  • Power:
    Surface Mount: 12 VDC @ 500 mA (24 VAC Center Tap Camera Supply)
  • Circuit Board: Meets IPC Standard
  • Size (in./cm.) (LxW)
  • Surface Mount: 3.25 x 4.0 in., 8.26 x 10.16 cm
  • Shipping Weight: < 2 lbs./0.9 kg
• ENVIRONMENTAL
  • MTBF: > 100,000 hours
  • Operating Temp: -40º C to +74º C
  • Storage Temp: -40º C to +85º C
  • Relative Humidity: 0% to 95% (non-condensing)*
    * May be extended to condensation conditions by adding suffix '–C' to model number for conformal coating. (extra cost)