ACT ZTW230 Z-Wave, Transmitter, Wall-Mount, 230v, 1 Rocker, Euro, WhiteThis ZTW230 Wall Mounted Transmitter can be installed like a wall switch, however it does not directly connect to a load. Instead, it controls other Z-Wave devices (or nodes) that operate the ON/OFF or DIM/BRIGHT of lighting or other electrical loads. The ZTW230 Wall Mounted Transmitter is identified to the network using a Controller. The ZTW230 has no load control capability, but controls associated Z-Wave devices. Subsequent configuring of the ZTW230 Wall Mounted Transmitter using the Controller allows it to operate the ON/OFF and DIM/BRIGHT of associated groups of receivers by using multiple taps on the Transmitter switch. Up to 3 groups of (up to) 5 receivers per group can be controlled. Groups programmed on the ZTW230 can only be controlled from the ZTW230, however any node in any of the groups can be controlled from any other controller or transmitter in the system singly or within another group.HomePro products utilize radio frequency (RF) Z-Wave™ technology to communicate and inter-operate, and are compatible with other Z-Wave™ enabled RF products. See specifications of your Controller for details on programming.- The ZTW230 is a 230 VAC, 50 Hz, RF Wall Transmitter with 3-way capability. ThisWall Transmitter can be controlled manually, or with the ACT multilevel auxiliary switch (AS200).
- The ZTW230 is a single switch design which serves as an RF transmitter where multiple switch taps control lights that are "associated". "Association" adds control of Z-Wave devices to the wall transmitter.
- Only requires power and provides expanded lighting control when installed.
- Each ZTW230 Wall Mounted Transmitter also functions as an automatic repeater to other HomePro Modules to guarantee full home coverage of the RF signal.
|
