ACT RF124 A10, 120VAC, 20A, Fixture Module, Isolated ContactThe RF124, RF204 and RF304 are A10 enhanced powerline carrier receivers controlling a single remote Form C Relay capable of switching a 30 amp load.
The RF124, RF204 and RF304 will continuously monitor the powerline for PCC signals, and adjust their gain to filter out line noise. They will close or open their relay via Standard or Extended X10 commands.
The RF124, RF204 and RF304 may be remote controlled by addressing it by its base address or its sub address, or through groups by the commands ALL LIGHTS ON, ALL LIGHTS OFF, or ALL UNITS OFF. These global commands must be configured.
The RF124 will transmit the current relay status when requested.
A status LED verifies power to unit, and guides simple configuring procedure.- Two way powerline communication. Reports ON/OFFstatus upon "Status Request" and automatically
- Triac Output controlled by X10 On/Off, Bright/Dim or Extended Code Preset Dim Signals
- X10 Standard Code (256 Addresses) and X10 compatible Extended Addressing capability (4096 addresses)
- Two way powerline communication, reports status upon "Status Request" for standard or extended addresses
- One latching 20 Amp Form A Relay with manual override and mechanical status indicator - holds last state on power loss.
- Easy Push Button Configuring for Standard Unit Address ON/OFF and:
- Response to "All Lights On" Command
- Response to "All Units Off" Command
- Response to "All Lights Off" Command
- Enable or disable "Polite Mode" - Factory Configuring for Extended Unit Address ON/OFF and: Response to "Status Request"
- Advanced A10 circuitry, X10 Signal Compatible
- Flying leads for field connection
|
