Home Automation > ELK Products > ELK-M1G Gold Home Automation System

ELK-M1 Cross Platform Control

Integrates - Security - Automation - Lighting - Telephone

The M1 Controller family offers unequaled value to Systems Integrators, Installers and End Users alike. Unlike panels that may be strong in automation but weak in security (or vice versa), the M1 boasts a rock solid security foundation with the most imaginative and powerful automation functionality available.

ELK-M1XZW Z-Wave Lighting Control Interface

ELK-M1XZW Z-Wave Lighting Control Interface

ELK-M1XZW Z-Wave Lighting Control Interface

ELK-M1XZW Z-Wave Enabled Device Controller

The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats (coming soon). The M1XZW interface functions as a Z-Wave Secondary Controller OR as a Z-Wave Static Update Controller (SUC) for holding the Z-Wave system setup programming. The interface connects to the M1 RS-485 data bus and is enrolled and identified as a Type 5 Expander. As such, it may be remotely located anywhere along the RS-485 data bus within the maximum stated distance limits. The housing is designed for wall mounting and includes mounting screws and anchors.

Z-Wave is a trademark of Zensys, Inc.

M1 Controllers can be programmed to control Z-Wave network devices based on any number of events using the powerful rules engine. These events include, but are not limited to:

  • Time
  • Alarm System Arm Status
  • Status of Alarm System Sensors such as door contact, motion sensors, etc.
  • Task Activation
  • Sunrise /Sunset – Light/Dark
  • Etc.

M1 Controllers can also control Z-wave network devices remotely. The M1Gold Control features a built-in, telephone remote control. With the M1XEP Ethernet Interface, both the M1Gold and M1EZ8 can control Z-Wave enabled devices over the internet, without the need for a dedicated, "24/7" server.

Features:
  • Flash Memory for Firmware Updating
  • Connects to the M1 Data Bus - RS-485
  • LED Indicators for Status and Programming
  • Push Button "Copy" Program Switch
  • For Indoor Use Only
Specifications:
  • Signal (Frequency): 908.42 MHz
  • Range: Up to 100 feet (line of sight) to closest Z-Wave enabled product
  • Operating Voltage: 12 Volts D.C.
  • Operating Temperature Range: 32-105 degrees F (0 - 40 degrees C)
  • Current Draw: approx. 60 mA
  • Housing Dimensions: 4.25" x 6.375" x 2.125"
  • Circuit Board Dimensions: 2.25" x 3.95"

Product #ELK-M1XZW
Price: US $135.71
QTY




Related Products