HAI 1108 Web-Link II Software
You’re just a click away with HAI Web-Link II.
Web-Link II is our award-winning software accessory for your HAI system that is sold WITHOUT any subscription fees!
Whether you’re at the office or on vacation, your home is only a click away. Using your laptop, PDA, web-enabled phone, or any computer with Internet access, you can monitor and control your home. You can even view and record video from cameras in your home with video streaming technology. It’s as easy as viewing your favorite web site.
Web-Link II is a great new way to access your HAI system via the Internet. Web-Link II allows you to monitor and adjust settings for lighting, heating and air, security, and appliances with the added benefit of wireless access, video surveillance and recording, and email notification of programmed events.
HAI’s Web-Link II will work inside a home on a single PC, and with a group of PC’s on a local network. It also takes advantage of the full-time Internet connection provided by popular cable modems and DSL. These connections, combined with Web-Link II’s intuitive, easy to use pages make it quick and easy to check on the house with video surveillance, record video based an a system event, view previously recorded videos, verify the kids have arrived home from school via email notification, and adjust the temperature right from your office PC, PDA, or web-enabled phone.
HAI Web-Link II runs in the background on a Windows 98 SE, 2000, NT, or XP Pro computer connected to any HAI Omni-class controller. HAI Web-Link II software generates Web pages from the controller’s data that can be viewed locally and on any networked computer via Internet or Local Area Network. After installing Web-Link II, no set up is required: Web-Link II’s smart software obtains its configuration from the HAI controller and presents a series of pages following the standard HAI menu format.
Web-Link II has advanced the initial Web-Link technology by adding features that allow a homeowner to view family and property with video surveillance, record video on demand or based on event, and enjoy wireless access over a PDA or web-enabled phone. In addition, a homeowner can receive emails based on programmed events or send and receive instant messages.
A Static IP Address or Dynamic DNS is required to access your system over the Internet. If your ISP can not provide you with a Static IP Address, then click here for information on Dynamic DNS.
The following are the minimum requirements for this software:
- HAI Omni LT, Omni, Omni II, OmniPro, or OmniPro II controller with 1.8 firmware or later.
- Your Windows media center PC must be connected to the HAI controller (see User's Guide (PDF) for the connection requirements)
- 200 MHz processor, Pentium with MMX or equivalent as a minimum computer requirement without streaming media capability
450 MHz processor higher, Pentium II or III or equivalent as a minimum computer requirement with streaming media capability
700 MHz dual processor or higher Pentium III or equivalent as recommended computer configuration
- Microsoft Windows 98 Second Edition, Windows NT 4 (with Service Pack 6 and later), Windows 2000, Windows XP Professional, or Windows Server 2003
(Note that Windows ME and Windows XP Home Edition are not supported operating systems)
- 32 MB of RAM is the minimum for Non-streaming Media Capability
128 MB of RAM is the minimum to support Streaming Media Capability
256 MB of RAM or more is recommended
- 50 MB hard-disk space
- CD-ROM drive
- USB port or Hauppauge Win TV-GO PCI boards are recommended and required as a minimum computer configuration for streaming media capability
Additional Information
|
