PB2E Emergency Exit Button - Momentary Release

Access Control > Securitron > Exit Control / Push Buttons

Securitron - Exit Control / Push Buttons

Securitron manufactures a wide variety of exit pushbuttons for security applications. All units are mechanical except for the unique SP-1 which employs touch sensing technology. The series features mounting on brushed stainless steel plates and includes an exit prompt instruction for each model. Hookup is from colored flying leads or labeled screw terminals. These exit buttons are attractive, rugged, reliable and suitable for installation anywhere. The most common application is momentary or timed release of an electric lock. This may be accomplished by direct hookup or by signaling the Requested to Exit (REX) input of an access control system. Note that depending on the door and locality, it may require the use of an exit device that will release the lock with one motion, such as Securitron’s Touch Sense Bar. Check with the local building or fire department.

PB2E-G Pushbutton "Push To Exit" Momentary Release, Green Button

Securitron PB2E Series Lighted Exit Button

Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor. They are mounted next to a door and momentarily pressing the button releases door.

The model PB2E is a spring loaded momentary 2" square, exit button, mounted on a stainless steel single gang outlet box cover. The SPDT contacts switch when the button is depressed and return when it is released. The contacts are UL listed with 5 AMP capacity. The PB2E can be used for momentary release of fail safe or fail secure electric locks. If interfaced with a release hold timer, it can provide for timed release of electric locks. It may also be used to input a REX (request to exit) signal to a card reader system. We recommend that the local building or fire safety authority be consulted prior to using exit buttons for door egress. They may require a "no special knowledge" exit device such as Securitron's Touch Sense Bar.

As the PB2E is an economy version, it is supplied without back box and without hookup wire. Connection is made via .250" quick connect terminals found on the rear of the unit. To connect these terminals, the installer may use push on connectors to which wires are crimped or wires may be directly soldered to the terminals through the hole provided. If a back box is used, the installer should select a box with minimum depth of 2 1/2". The drawing below shows identification of the switch's common, normally closed and normally open terminals.

Features:

Single gang
SPDT 3 Amp contacts
Operates on 12 or 24 VDC (field selectable)
UL Listed
For indoor use only
- For outdoor use, add WCC & WBB (see below)

Ordering Information

Part No. Description

PB2-G 2" Square Momentary, SPDT, Green Button, Illuminated

PB2-R 2" Square Momentary, SPDT, Red Button, Illuminated

PB22-G 2" Square Momentary, DPDT, Green Button, Illuminated

PB22-R 2" Square Momentary, DPDT, Red Button, Illuminated

PB2H 2" Square Momentary, SPDT, Blue Button, Illuminated, Handicap

PB2E-G 2" Square Momentary, SPDT, Green Button

PB2E-R 2" Square Momentary, SPDT, Red Button

PB2EH 2" Square Momentary, SPDT, Blue Button, Handicap

PB2-LK Illumination Kit for Non-Illuminated PB2 Series Push Buttons

WCC Weather Cover Single Gang

WBB Gasketed Backbox Single Gang

Stock item. Usually ships same day.

Product #SN-PB2EG

Price: US $41.50

QTY

Add to Cart Buy Now

Item Name	Price	Qty	Buy
WBB Weather Back-Box Single Gang-Deep	US $20.75
WCC Weather Cover-Clear Single Gang	US $27.66
TM-9 Time Mate Timer (SN-TM9)	US $43.56
PB2-LK Illumination kit for non-illuminated PB2 Series Push Buttons	US $18.00