Takex / Pulnix PU-PB10NSE 33' Miniature Flush Mount Single Photoelectric Beam
Features
- Detection System: Single Active Infrared Beam
- Wavelength: 940nm
- Modulation: Modulation: 500Hz
- Protection Distance Outdoors: 10m (33ft.)
- Protection Distance Indoors: 10m (33ft.)
- Response Time: 100msec.
- Frequency Selection: Not Applicable
- Alarm Output: Dry Relay Contact, N/O, N/C Switch Selectable
- Reset: Approx. 1.5 secs.
- Contact Rating: 30VAC/DC 0.3A Max
- Environmental Output: Not Applicable
- Contact Rating1: Not Applicable
- Tamper Output: Not Applicable
- Contact Rating2: Not Applicable
- Alarm Led Red: On at Alarm
- Sensitivity Attenuation Led Red: Not Applicable
- Alarm Memory Led Red: Not Applicable
- Lens Adjustment: Not Applicaple
- Supply Power: 10 to 30VDC ( non polarity)
- Current Consumption: 45mA Max.
- Ambient Temperature: -31ºF to + 151ºF (-35ºC to + 66ºC)
- Installation: Wall or Post mounting
- Wiring: Terminals
- Accessories: Refer Accessory Listing
- Weight: Sensors + Control: 13.6oz (380g)
- External Appearance: Sensors: PC Resin (clear)
- Control: ABS Resin (white)
|
