HID Corp (Hughes) ProxPro II 5455 125 kHz Wall Switch Proximity Reader
HID's ProxPro II proximity reader for access control combines performance, reliability, and ease of installation into a two-piece, weatherproof potted enclosure. International users will appreciate the multilingual installation manual, lower voltage requirement and flexible mounting options.
Features
- Ideal for medium-range applications.
- Available with Wiegand or Clock-and-Data interface.
- Optional glass mount kit available for mounting the reader behind glass.
- Potted reader suitable for indoor or outdoor use.
- Available in black, white, gray or beige.
- 18" (45 cm) wire pigtail standard; consult factory for 9' (2.7 m) pigtail available by special order.
How to Order Guide
| ProxPro® II Card Reader Description |
Base
Part No. |
Current
Rev No.* |
Color
Options |
Hardware
Options |
Configuration Setting
& Options |
Custom² |
ProxPro® II Proximity Reader
with Wiegand output
with Clock & Data Output |
5455
5458 |
B |
G = Char Gray
B = Beige
W = White
K = Black |
N = No Keypad, Pigtail (18")
L = No Keypad, Long Pigtail (9') |
00 04
01 05
02 06
03 07 |
XXXX Y |
| ProxPro® Card Reader Description |
Base
Part No. |
Current
Rev No.* |
Color
Options |
Hardware
Options |
Configuration Setting
& Options |
Custom² |
ProxPro® Proximity Reader
with Wiegand output
with Serial output6
with Clock & Data Output |
5355
5352
5358 |
A |
G = Char Gray
B = Beige |
N = No Keypad, Terminal Strip
K = Keypad3, Terminal Strip
S = Keypad4, Terminal Strip |
00 09
10 11
14 19
20 21 |
XXXX Y |
*Revision numbers and availability are subject to change without notice.
¹ProxPro II Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read
02 = Beep on, LED normally off, reader flashes green on tag read
03 = Beep off, LED normally off, reader flashes green on tag read
04 = Beep on, LED normally red, host must flash green
05 = Beep off, LED normally red, host must flash green
06 = Beep on, LED normally off, host must flash red and/or green
07 = Beep off, LED normally off, host must flash red and/or green
²Consult Factory.
³ProxPro Reader with Keypad (Hardware Option "K" Version): data is outputted over shared Wiegand cable. Reader processes keystrokes.
4ProxPro Reader with Keypad (Hardware Option "S" Version): (3 x 4 Matrix) requires additional 7 conductor keypad cable. Control panel processes keystrokes.
5ProxPro Configuration Setting options are as follows (factory programmed)::
00 = Buffer one key, no parity, 4 bit message
09 = Buffer one key, add compliment, 8 bit message (Dorado)
10 = Buffer six keys and add parity
11 = Buffer one key and add parity
14 = Buffer one to five keys (Standard 26 bit output)
19 = Buffer four keys and add parity
20 = Single Key buffering
21 = Supervision Mode
6ProxPro Serial output reads cards with up to 37-bit formats, and outputs RS232, RS422, and RS485.
7ProxPro reader Configuration Settings are selected by the customer via dip switch settings. 00 = LED normally red, reader flashes green on tag reads.
8An optional 9 foot pigtail is available through our HID European office and can also be available in the Americas and Asia Pacific regions via special order of 2,500 unit minimum order quantity. Please call the HID factory for pricing and lead-times.
Optional Glass Mount Kit for ProxPro and ProxPro II Readers = 5455AGM00.
|
