HID Corp (Hughes) ProxPoint Plus 6005 Proximity - 125 kHz Readers
Overview
HID's ProxPoint Plus reader combines multiple configuration options with an attractive, inconspicuous design and economical price. Its secure potted electronics are ideal for both indoor and outdoor applications.
Features
- Small sized, low cost reader features a beeper and multicolor LED which can be host and/or locally controlled.
- Potted reader suitable for indoor or outdoor use.
- 18" (45 cm) wire pigtail standard; consult factory for 9' (2.7 m) pigtail available by special order.
- Classic Series covers available in black, gray, white or beige. Designer Series covers available in black or gray.
- Features a beeper and multicolor LED which can be hostand/ or locally controlled.
- Enables various beeper and LED configurations, depending on individual site requirements.
- Can read HID cards with formats up to 85 bits.
- Designed for mounting directly onto metal with no change in read range performance.
- Available with either Wiegand or Clock-and-Data (magnetic stripe data) output.
- Compatible with all standard access control systems.
- Aesthetic design available in two cover designs and in four colors to match any decor.
- Includes multilingual installation manual.
Specifications
- Typical maximum* read range
– ProxCard® II Card - up to 3" (7.6 cm)
– ISOProx® II card - up to 2.5" (6.35 cm)
– DuoProx® II Card – up to 2.5" (6.35 cm)
– Smart ISOProx®/DuoProx® II Cards – up to 2.5" (6.35 cm)
– Proximity & MIFARE® Card - up to 2.5" (6.35 cm)
– ProxCard Plus® Card - up to 1.0" (2.5 cm)
– ProxKey® II Keyfob - up to 1.5" (3.8 cm)
– MicroProx® Tag - up to 2" (5.1 cm)
*Depending on local installation conditions.
- Dimensions: 3.135" x 1.720" x 0.660" (7.96 x 4.37 x 1.68 cm)
- Power Supply: 5-16 VDC
Linear power supplies are recommended.
- Maximum Current Requirements: Current (DC): Average 30 mA, Peak 75 mA
- Operating Temperature: -22º to 150º F (-30º to 65º C)
- Operating Humidity: 0-95% relative humidity noncondensing
- Weight: 2.7 oz. (75 gm)
- Current Requirements: 20mA avg / 75mA peak at 12VDC
- Cable Distance: Wiegand or Clock-and-Data interface: 500 feet (150 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
- Certifications
– Canada/UL 294 Listed
– FCC Certification, United States
– Canada Certification
– EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
– Fifteen EU Countries under the R&TTE Directive (EN 300 330 - SRD, and ETS 300 683 - EMC)
– CE Mark
– Australia C-Tick, New Zealand
– Taiwan, China
How to Order Guide
| Card Reader Description |
Base
Part No. |
Current
Rev No.* |
Color
Options |
Hardware
Options |
Configuration Setting
& Options |
Custom² |
ProxPoint Plus Proximity Reader
with Wiegand output
with Clock and Data output |
6005
6008 |
B
B |
G = Classic Charcoal Gray
B = Classic Beige
W = Classic White
K = Classic Black
1 = Designer Black
2 = Designer Charcoal Gray
4 = Designer Wave Blue
5 = Designer White |
B = Pigtail (18 inches/45.7 cm)
L = Long Pigtail (9 feet/3 meters)³ |
01 04
02 05
03 06
04 07 |
XXXX Y |
*Revision numbers and availability are subject to change without notice.
Notes:
¹Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read
01 = Beep off, LED normally red, reader flashes green on tag read
02 = Beep on, LED normally off, reader flashes green on tag read
03 = Beep off, LED normally off, reader flashes green on tag read
04 = Beep on, LED normally red, host must flash green
05 = Beep off, LED normally red, host must flash green
06 = Beep on, LED normally off, host must flash red and/or green
07 = Beep off, LED normally off, host must flash red and/or green
²Consult Factory
³An optional 9 foot pigtail is available through our HID European office and can also be available in the Americas and Asia Pacific regions via special order of 2,500 unit minimum order quantity. Please call the HID factory for pricing and lead-times.
|
