PC5700 Fire Zone Expansion Module from DSC

From the creators of the most advanced security system available comes Power832 Home Control, a fully integrated security/automation system that makes lighting and appliance control as easy as using a telephone. DSC's revolutionary ESCORT telephone access control module is a low cost system option that turns any touch-tone phone into a Power832 'high end' system interface with clear voice prompts. Its smart energy management, too, allowing you to shut off lighting and appliances when they are not being used.

Power832 lighting and appliance control is the most versatile, easy to use and quickly installed automation system available because it uses X-10 line carrier technology, the most popular and widely used automation system on the market today. Best of all, line carrier technology means that there are no wires to run between the control panel and the lights or appliances that you need to control.

Just connect an X- IO control module, program the system and you have complete control - by schedule, manually, or in response to a system event (e.g. when an alarm occurs, or the security system is disarmed).

Since criminals like to work under the cover of darkness, Power832 lighting control offers even greater security as well as energy savings and lifestyle convenience. Your installer can program a holiday schedule that will turn on lights at random intervals when you're not there. If you elect to install smoke detectors as part of your Power832 system, the ESCORT access control module can automatically turn on lights to illuminate your evacuation route if a fire alarm is announced in the middle of the night.

• A zone expansion module which provides:
  - dual supervised telephone lines
  - 2 Class A supervisory waterflow zones
  - ground fault detection zone
  - 4 general purpose fire or burglary zones
• Tamper and trouble reporting codes
• Connect up to 1000' (305m) from control panel via KEYBUS
• Module current draw: 150mA @ 12VDC
• Supports up to four EMS-100 thermostats
• EMS-100 has 4 temperature control modes:
  - day occupancy mode
  - night occupancy mode
  - auxiliary occupancy mode
  - away occupancy mode
• Each thermostat optionally supports:
  - up to six EMS-IDS remote indoor temperature sensors for interior temperature averaging
  - one EMS-ODS outdoor temperature sensor for display of outdoor temperature