VISTA-20P Kit (Ademco)

The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection and dual partitions. The panel's installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.

Kit Includes:

• Vista-20P Burglar Alarm Control Panel
• 6160 Custom Alpha Keypad
• WAVE-2 Siren
• Requires 12-Volt / 7-AH Backup Battery
  - Battery not included in kit

Features:

• Eight on-board hardwire zones standard (15 when Zone Doubling feature is used)
• Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
• Wireless keys can be programmed without using zones
• 16 output devices
  – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
  – X-10® devices (when used with a 4300 Transformer)
• Two low current on-board trigger outputs
• 100 Event Log viewable at system keypads with time/date stamp
• 48 system user codes assignable to either partition
• Two independent partitions plus a common partition
  – Global Arming from any system keypad
  – Gotofunction to view or operate one partition from the other
  – Separate partition account numbers
• Four installer configurable zone types allows the installer to create custom zone types by assigning all zone attributes
• Multiple actions on output devices depending on system "state"
  – Turns lights off when system arms
  – Turns the same light on when system disarms
  – Flashes same lights when system is in alarm
• Built-in phone line cut monitor with programmable delay and annunciation options
  – Display on system keypads
  – Trigger local sounders
  – Trigger system bell
• Supports four-wire, and up to 16 two-wire smokes
  – Works with Sentrol CleanMe™ maintenance signal

Valuable End User Features

• Now viewable on system keypads:
  – Exit countdown
  – Time and date display*
  – Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• A variety of wireless remote controls for single-button operation
• User Scheduling
  – Automatically activates X-10 and relays at programmed times
  – Latchkey reports to pagers
  – Auto arm/disarm
  – "User access" time windows
• Supports up to four end user numeric pagers
• VIP Module allows system control from any touchtone phone
• Chime by zone
• UL approved for ANSI/SIA CP-01-2000

Security Dealer Features

• False alarm prevention features to help reduce false alarms
• Automatic System Load Shed
  – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries
• Dynamic Signaling
  – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio

*Requires custom alpha keypad

Specifications

Electrical

• Aux. power 12VDC, 600mA maximum
• Seven hour standby at 400mA aux. load with four amp hour battery
• 16.5VAC/25VA transformer
• Alarm output 12VDC, 2.0 amps maximum
• For UL installations, combined aux. and alarm output cannot exceed 700mA

Output Control

• Supports up to four relay boards (up to 16 relays)
• Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices

Zones

• Eight hardwired zones (15 with zone doubling)
• Selectable response 10msec, 350msec, 750msec
• Assignable to any partition
• 20 selectable zone types plus four configurable zone types
• Programmable swinger suppression

Expansion Devices

• 4219 – Eight hardwired zones – 16mA
• 4204 – Up to four relays – 15mA standby (each active relay draws an additional 40mA)
• 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA)

Accessories

• 4286 VIP Voice Module – 220mA
• 5881 ENL RF Receiver supports up to eight zones – 60mA
• 5881ENM supports up to 16 zones – 50mA
• 5881ENH up to 40 zones – 50mA
• 5883 Transceiver supports up to 40 zones – 80mA
• Supports Eagle 1225 and 1221 boards

Keypads

• 6160 / 6139 Custom English (required for programming) – 150mA/40mA (6160) 130mA/40mA (6139)
• 6150 / 6128 Fixed English LCD – 70mA/40mA (6150), 40mA/20mA (6128)
• 6150RF Fixed English LCD with built-in receiver 105mA/80mA

Agency Listings

• UL Residential Fire, Burglary and CSFM

Smoke Detectors

• Supports up to 16 two-wire smoke detectors
• Supports four-wire smoke detectors

Communications

• Touchtone or pulse
• Formats supported
  – ADEMCO Contact ID
  – ADEMCO 4 + 2 Express
  – ADEMCO low speed
  – Sescoa/Radionics
• 3 + 1, 4 + 1 and 4 + 2 reporting
• Reporting capabilities
  – Split
  – Dual
  – Split/Dual – True dial tone detection
• Low battery reports 11.2 – 11.6VDC
• AC loss and restoral reporting supported