CCTV Video Surveillance > Nitek > Twisted Pair Video Solutions
Twisted Pair Video Solutions

NITEK - Twisted Pair Systems

Single channel video transmission components & systems for operation over unshielded twisted pair wire (UTP) cables.

These systems are designed for use over point-to-point copper wire of 18 AWG to 26 AWG. Individually shielded twisted pairs should not be used. Connections through splices and punch-down blocks are acceptable. The systems are not designed to operate over leased telephone lines routed through Telephone Company Central Offices (C.O.'s). For operation over leased lines see "Leased Line Video Systems". Distance specifications are based upon 24 AWG wire and will vary with other gages of wire. To determine which system best fits a particular application, first determine the correct cable length.

Nitek EX1120 Selectable Range Twisted Pair Transmission System

Nitek EX1120 Selectable Range Twisted Pair Transmission System

Nitek EX1120 Selectable Range Twisted Pair Transmission System

Nitek EX1120 Selectable Range Twisted Pair Transmission System

EX1120 - from 1,000 to 12,000 feet

Live video transmission system for operation over twisted pair, Cat 5, Cat 6 or Cat 7 cables.

The EX1120 is a complete Twisted Pair Video system made up of a TR1120 receiver unit and a TT1120 transmitter unit. The system is designed to operate over Category 2, 3, 4, 5, 6 or 7 twisted pair cable. It works well over existing communication, computer network spare pairs, or new cable installations. A highly balanced transmitter output assures that the system will not interfere with other network equipment. Advanced receiver and transmitter electronics provide optimum video quality and complete immunity from ground loop, hum and noise. Both the transmitter and receiver provide adjustment for gain and frequency compensation allowing the system to be "finetuned" for the cable. These unique adjustments provide optimum performance over the entire operating range of the system and allow cable lengths to be estimated with a wide safety margin. The receiver and transmitter units each require 24 VAC power. In multiple receiver and/or transmitter applications a common supply can be used for the system.

System includes active transmitter unit, active receiver unit and two 24V power supplies. Monochrome applications up to 12,000 feet and color to 9,000 feet. DIP switches set distances for optimum color or B/W video performance by setting gain, frequency compensation and equalization. The EX1120 provides higher resolution video over the EX560 operating range and is recommended for applications under 6,000 feet where higher performance is required. System also provides high noise immunity, ground loop immunity and surge protection. The EX1120 is also recommended for Repeater applications where transmission distances in excess of 12,000 feet are required and a Repeater system can be installed in between. Contact NITEK Tech Support for more information on Repeaters.

Features
  • Active electronics compensate for frequency and level loss providing the highest quality video
  • High resolution color or monochrome video
  • Immunity to ground loop. Video and AC can be run in a common raceway, where code allows
  • Built-in protection from power surges, transients, static or other electrical interference
  • Video can be run in the same cable with telephone and computer signals
  • Weather resistant design
  • Easy to install
Applications
  • Large Campus Installations
  • Shopping Malls
  • Airports
  • High Voltage Facilities
  • Traffic Around City Areas
  • Remote Gates
Product Specifications

Product #N1-EX1120
Price: US $1,486.82
QTY




Related Products