NV-518A Dual Video/Audio Transceiver
The NVT Model NV-518A Dual Video/Audio Transceiver contains one amplified receiver that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. An additional passive port is included allowing the support of bi-directional video, or as a second receive path up to 1,000ft (300m). Alternately, the ports may be combined to allow the NV-518A to function as a repeater. Baseband (composite) signals of any type are supported.
Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance Learning.
The unparalleled interference rejection and low emissions of the Model NV-518A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. Video signals traveling in opposite directions in the same wire bundle are limited to 1,000ft over Category 2 or 3, and 2,000ft over Category 5 wire.
The NV-518A comes with an RJ-45 patch-cord and power supply. For Rack-mounting, use the NV-518AR.
Features
- Dual full-motion monochrome or color video and audio
- Distances up to 3,000ft (1km) when used with another NV-518A
- Exceptional interference rejection
- Built-in transient protection & ground lifting
- Built-in brightness & sharpness controls, Power LED, and Active LED
- BNC, 1/4" Phone and RJ-45 jack connections
- May be used as a repeater
- Limited lifetime warranty
Specifications*
Audio |
Attenuation |
20 Hz to 20 KHz |
1.5 dB typ |
Impedance |
600 ohms |
Signal |
Line Level |
+4 dBm max |
Video |
Attenuation |
DC to 5 Mhz |
1.5 dB max |
Common-mode rejection |
15KHz to 5 Mhz |
60 dB typ |
Impedance |
Coax, female BNC |
75 ohms |
UTP, Screw Terminals |
100 ohms |
LEDs |
Red LED |
Power On |
Green LED |
Active when path "A" signal received |
Wire Type |
Network Wiring |
One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal |
Category Type |
Cat 2 or better |
Impedance |
100 ± 20 ohms |
DC Loop Resistance |
26 ohms max |
Differential Capacitance |
19 pF/ft max |
Wire Length, camera to monitor including coax |
3,000 ft max (900 m). |
Connector Interfaces |
Video |
Female BNC jacks |
Audio |
1/4" Phone Jack |
Network Interface |
RJ-45 Non-keyed Jack |
Power |
12 to 24 VAC 70mA (power supply included) |
Environmental |
Temperature |
0 to +50° C |
Humidity (non-condensing) |
0 to 95%
|
|
ESD Susceptibility (200 pf probe)
|
20 KV
|
|
Mechanical
|
|
Dimensions excluding BNC
|
5.75 x 3.60 x 1.15 in (146 x 94.4 x 29.2 mm)
|
|
Weight
|
16 oz (450 g)
|
|
Material
|
Gray ABS
|
|
Mounting
|
Two 3M Dual Lock adhesive strips
|
|
* Specifications subject to change without notice. |
|