NV-1613A

The NVT NV–1613A is a 16-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

NV-1662R

The NV-1662R is a 16-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC using Category-5 or better. Available with screw terminal video inputs.

NVT Model NV-211T-M Video Transmitter

The NVT Model NV-211T-M Video Transmitter is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

Up-the-coax type signal may be sent over the same wire pair. Used as a transmitter, the NV-211T-M has a mini-coax pigtail lead which allows for in-camera mounting in most dome cameras and greater number of mounting options in general.

The unparalleled interference rejection and low emissions of the Model NV-211T-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.

NV-211T-M

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

Model NV-212A Video Transceiver

The NVT Model NV-212A Video Transceiver is a passive (non-amplified) device that allows intra-building transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported at distances up to 500ft (150m).

Up-the-coax type signal may be sent over the same wire pair.  Used as a receiver, the NV-212A is fully compatible with qualified cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-212A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.

NV-213A & NV-213A-M

The NVT Model NV-213A and NV-213A-M Video Transceivers are passive (non-amplified) devices that allow the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

“Up-the-coax” type P/T/Z signals may be sent over the same wire pair.  Used as a receiver, the NV-213A–M is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-213A (-M) allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems  are eliminated.

NV-213A

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

NV-213A-M

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

NV-213A & NV-213A-M

The NVT Model NV-213A and NV-213A-M Video Transceivers are passive (non-amplified) devices that allow the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

“Up-the-coax” type P/T/Z signals may be sent over the same wire pair.  Used as a receiver, the NV-213A–M is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-213A (-M) allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems  are eliminated.

NV-213A

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

NV-213A-M

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

NV-214A-M Video Transmitter - NVT

The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-3213A 

The NVT NV-3213A is a 32-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

NV-3262R  

The NVT Model NV-3262R is a 32-port active (amplified) device that allows the reception of real-time monochrome or color video up to one mile (1,6km) on Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC of Category-5. Baseband (composite) signals of any type are supported. The NV-3262R has screw terminal video inputs.

The unparalleled interference rejection and low emissions allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems  are eliminated. Perfect for larger CCTV installations where port density and camera number growth are prevalent.

NV-413A

The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

“Up-the-coax” type P/T/Z signals may be sent over the same wire pair.  Used as a receiver, the NV-413A is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-413A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV-213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.

NV-452R 

The NVT Model NV-452R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) using Category-5. 

NV-652R

The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) NTSC using Category-5.  Baseband (composite) signals of any type are supported.

NV-653T

The NVT Model NV-653T Video Transmitter is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or -3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) NTSC using Category-5.  Baseband (composite) signals of any type are supported.

NV-862R

The NV–862R is an 8-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC using Category-5 or better. Available with screw terminal video inputs.