Macurco SS103 CO Fan Controller: Monitor 3 (SS103-3A) or 10 (SS103-10A) Remote Detectors
Description
SS103 CO fan controller to monitor up to three (SS103-3A) or ten (SS103-10A) remote detectors. Adjustable alarm settings, three 10amp relays, system status LEDs, sturdy electrical box enclosure, meets OSHA & UBC standards.
Building codes require that enclosed parking garages either have exhaust fans operate continuously, or have automatic Carbon Monoxide (CO) detection and exhaust fan control systems. The difference in fan operating time is 24 hours a day versus one to two hours. Energy savings are significant.
The SS103-3A and SS103-10A are exhaust fan controllers which, in conjunction with CS102A, SS102H or SS102HC-1 Carbon Monoxide detectors, provide automatic controls to ensure a safe environment in parking garages or maintenance facilities. The SS103-3A can control up to three of the 102 type CO detectors, while the SS103-10A can control up to 10 of the 102 type CO detectors. (The CS102A replaced the SS102H in mid 2000).
The SS102/103 systems are designed to meet all known specifications for safety in enclosed parking garages, including the Uniform Building Code and OSHA 50 ppm CO requirements.
General Information
The SS103-3A Controller supplies all power to, and receives information from up to three SS102H or SS102HC-1 Carbon Monoxide Sensors. The panel can control three fans or two fans and one alarm circuit. The SS103-10A Controller supplies all power to, and receives information from up to ten SS102H or SS102HC-1 Carbon Monoxide Sensors. The panel can control three fans, or two fans and one alarm circuit. Please refer to the Automatic Exhaust Fan Controllers For Parking Garages data sheet for more technical and wiring information.
Features
- Money saving devices, both in energy costs and extended fan life.
- Units are enclosed in sturdy electrical boxes, rain proof or oil tight.
- Clearly labeled terminal strips for easy hook up.
- Fan settings are end user adjustable, to meet any specification.
- Alarm circuits provided with adjustable delay of turn on time.
- Bright LEDs indicate system status.
- LEDs indicate which sensors are active, and supervise wiring.
- SS103-3A and SS103-10A are approved by the Los Angeles Dept of Bldg & Safety.
- All SS102 Sensors are supervised; controllers indicate status.
- Alarm circuits warn of a high CO level, such as 200 PPM UBC STEL.
- No regular maintenance necessary.
- Simple installation and operation.
Specifications
| Specification |
SS103-3A |
SS103-10A |
| SIZE: INCHES | 8 x 6 x 4 | 12 x 10 x 6 |
| WEIGHT: POUNDS | 7 | 15 |
| POWER INPUT 120 VAC | 2 Amps | 2 Amps |
| OUTPUT CONTROL RELAYS | 3 | 3 |
| RELAY RATING: AMPS | 10 | 10 |
| RELAY RATING: VOLTS | 240 | 240 |
| FAN 1 RANGE, PPM | 25 to 115 | 25 to 175 |
| FAN 2 RANGE PPM | 25 to 175 | 75 to 225 |
| ALARM RANGE, PPM | #2 delayed | 100 to 400 |
| FAN TURN ON DELAY | 30 sec. | 2 min. |
| ALARM DELAY, MIN. | 3 to 33 | ½ to 60 |
| RELAY TURN OFF DELAY, SEC. | 15 | 1 |
Additional Information
|
