Access Control > Securitron > Lock Control Panels
Lock Control Panels

Securitron - Lock Control Panels

The LCP Series panel is designed to operate any DC electric lock or strike that operates on 12 or 24 volts (fail safe or fail secure.) Other electric locks can be accommodated by adding relays. The panel is constructed of control zones supplied in multiples of four.

A single multi-color monitoring LED per zone displays four possible conditions of the lock: Green shows that the zone is secure and this condition may be driven from a door switch, lock status switch or the power status of the lock. “Off” shows that the lock has been “legally” released from either the panel control switch or from a remote switch at the door. In this condition, the toggle switch itself illuminates yellow. Red is the alarm condition showing that a lock which should be secure is not reporting secure. This condition is latching and is reset from a momentary switch once the zone had been resecured. A Sonalert accompanies the red “violation” condition. Orange shows that the zone has been resecured and is ready for alarm reset. After reset, the indicator terns green again.

SLP-4 Control Station, Double Gang, 4 Zone, Momentary

SLP-4 Control Station, Double Gang, 4 Zone, Momentary

Securitron SLP-4 Switch Light Panel: Double Gang, Momentary

Used to control and monitor up to four electric locks. The SLP-4 is a simple control and monitoring station for up to four electric locks. It mounts four alternate action push button switches on a double gang wall plate. Each switch serves to release or secure the associated electric lock and red and green indicator lights monitor the individual status of the lock or zone. The SLP-4 will operate on either 12 or 24 VDC.



SLP-4A Control Station, Double Gang, 4 Zone, Alternating

SLP-4A Control Station, Double Gang, 4 Zone, Alternating

Securitron SLP-4A Switch Light Panel: Double Gang, Alternate

Used to control and monitor up to four electric locks. The SLP-4 is a simple control and monitoring station for up to four electric locks. It mounts four alternate action push button switches on a double gang wall plate. Each switch serves to release or secure the associated electric lock and red and green indicator lights monitor the individual status of the lock or zone. The SLP-4 will operate on either 12 or 24 VDC.