| Intercom Systems > Aiphone Intercom Systems > KCS-1ARD Color Video Systems | ![]() |
||
![]() Aiphone KC-1GRD: 1 x 3 Color Video System
| |||
|
The KC 1 x 3 Color Video Sentry series is a video entry system with capacity for one video door station and up to three inside monitor/handset stations. It allows access control of 1 entrance from up to 3 different stations (rooms), which includes a camera unit (KC-DAR), master monitor (KC-1GRD), sub monitor (KC-1GRD) and audio-only sub station (KC-1SD). The video room stations are equipped with a 4" flat color monitor, connected to a video door station located at an entry area. The video door station contains a CCD chip camera with illumination LEDs for low light applications, giving you extremely clear and bright images are shown on the inside video screen. The camera angle is adjustable up and down from the inside monitor, allowing the viewer inside to adjust the camera’s angle to their needs. An incoming call from the door station sounds a 4 stroke chime. The monitor(s) come on displaying the image of the caller. The person at the inside station picks up to answer, and the visitor speaks hands free. The entry area can be monitored by pressing the "monitor" button on any room station. This allows both audio and video monitoring, staying on for approximately 30 seconds. And with the optional door strike and relay, you can also unlock the front door from the inside master station. To place an a call between all the inside stations, just simply pick up the handset on the monitor, press the All Call button and make the announcement. There is also an optional stainless steel housing for the door station as well as a Picture Memory Unit available for the system. The KC series features some of the best characteristics in the market with an easy to install system, and installation requires only 2 wires (+ 2 for power supply) and no coaxial cable. Features
|
KCS-1ARD Color Video Set With Tilt (KC-1MRD, KC-DAR, PS-2410A)
KCS-1ARD Aiphone Basic 1 Door 1 Monitor SystemBasic 1 Door 1 Monitor System. Includes door station (KC-DAR), monitor (KC-1MRD) and power supply (PS-2410A). |
KC-1GRD Aiphone Color Video Intercom Master Station (1 per system)
KC-1GRD Aiphone Video Intercom Master StationMaster intercom station |
KC-1HRD Aiphone Color Video Sub Master Station
KC-1HRD Aiphone Color Video Sub Master StationSub station for KC-1GRD: 1 x 3 Color Video System. (Maximum 2 Per System) |
KC-1SD Aiphone Audio Only Handset Sub-Station
KC-1SD Aiphone Audio Sub StationAudio sub station for the KC-1GRD: 1 x 3 Color Video System. |
KC-DAR Color Tilt Door Station (1 Per System)
KC-DAR Aiphone Video Door StationVideo door station with tilt color camera. (1 per system) |
PS-2420UL 24V DC Power Supply, 2A
PS-2420UL Aiphone 24V DC, 1A Power Supply24V DC, 1A power supply used for Aiphone intercoms MC-60/4, NEM-30-C, NEM-30A-C, NEM-40A-C, NEM-40-C, YAZ-90-3, KC-1GRD, KB-3MRD, KC-32EU, NHX, and NDRM. |
KB-3MRD Color Main Room Station (1 Per System)
|
Video sentry expanded color system. |
KB-3HRD Color Sub Room Station (Maximum 4 Per System)
KB-3SD Aiphone Audio Only Handset Sub-Station for KCS-1ARD System
KB-3SD Aiphone Audio Sub Station for KCS-1ARD SystemThe KB-3SD is an audio-only sub master station for use in KB-3MRD system. One or two KB-SD3's can be used in place of KB-3HRD sub master station with monitor. |
KB-DAR Color Tilt Door Station (Maximum 3 Per System)
|
Allows any standard motion detector or activation device with a normally open contact to be interfaced with the KB-3MRD Video System. When the motion detector is tripped, the camera will turn on and a chime will be heard at the inside monitor station(s), indicating that there is some activity near the door station location. |
RY-3DL Selective Door Release Adaptor
|
Door Release Adaptor. Provides selective door release capability with the IE-2AD Audio Door Entry system, the MY-2CD PanTilt Video Entry system or the KB-3MRD Tilt Color Video system. |
PS-2420UL 24V DC Power Supply, 2A
PS-2420UL Aiphone 24V DC, 1A Power Supply24V DC, 1A power supply used for Aiphone intercoms MC-60/4, NEM-30-C, NEM-30A-C, NEM-40A-C, NEM-40-C, YAZ-90-3, KC-1GRD, KB-3MRD, KC-32EU, NHX, and NDRM. |
IE-JA Flush Mount Door Station, Stainless Steel
Aiphone IE-JA 2-Gang Flush Mount Door StationWeather restistant, 2-gang audio door station. |
KC-32EU Picture Memory Unit
Aiphone KC-32EU Picture Memory Unit
|
KA-DGR Panel Stainless Steel Housing for K-Series Door Stations
Aiphone KA-DGR Video Door Station HousingStainless steel housing for KC-DAR and KB-DAR color video door stations. |
KAW-D 30 Degree Angle Box for K-Series Door Stations
MCW-S Desk Stand for Monitor
Aiphone MCW-S Desk Mount Stand for Video MonitorsProvides a desk mounting option for Aiphone monitors, angling them back at approximately 75 degrees. |
MCW-2S Desk Stand for Monitor & KC-32EU
Aiphone MCW-2S Desk Mount Stand for Video MonitorsProvides a desk mounting option for Aiphone monitors, angling them back at approximately 75 degrees. |
IER-2 Chime Extension Speaker
Aiphone IER-2 Call Extension SpeakerCall extension speaker with chime call tone volume switch. |
TAR-3 External Signaling Relay / AT-406
|
Allows integration of a doorbell to intercom system. Relay activated while handset is ringing. Relay released when handset is lifted. |
SKK-620A 6V DC Power Supply, 0.2A, UL/LEM-1,3, C-ML/A, TAR-3
Aiphone SKK-620 DC 6V Power SupplyDC 6V power supply or four "C" batteries. |
EL-9S Electric Door Strike
EL-9S Electric Door Strike from AiphoneThe EL-9S is a fail-secure, low profile door strike designed for interior wood framed doors. Compact in size, the EL-9S easily fits into a standard wood door frame. It will function with most release activation equipment. |
PT-1210N 12V AC Plug-In Transformer, 10VA, UL
|
The PT-1210N is an AC 12V Transformer, Class 2, compact, plug-in style power source used for intercom and door release applications. |
KMB-45 45 Degree Mullion Mounting Bracket for K-Series Door Stations
SBX-ACE Stainless Steel Device Enclosure
Aiphone SBX-ACE Stainless Steel Device EnclosureA stainless steel surface mount box designed for mounting an Aipohone door station and Access control device together to create a complete access control package. The unit is constructed of double-layer cold rolled brushed stainless steel, folded and welded. Openings at the bottom of the unit are to allow drainage of moisture when used in outdoor applications. Openings are provided in the back of the unit for mounting and wiring. Three conduit knockouts are provided at the bottom of the unit. |
KA-FSH Flush Mount Stainless Steel Housing
KA-FSH Flush Mount Stainless Steel Housing for Color Video Door StationsFlush mount stainless steel housing kit for Aiphone K-series video door stations. The housing provides greater vandal resistance for commercial or institutional applications. For further protection, a hood is included to help protect the video door station from direct rain or sunlight. |
KCW-D/A Video Demodulator for KC System
KBW-M CCTV Color Camera Modulator
KBW-M CCTV Color Camera Modulator - AiphoneAllows a standard color camera to be used with the KB Series video entry system. Use video door stations at entry areas, then connect a camera to view a wider area from the Aiphone monitor. Each CCTV camera requires one KBW-M modulator. Biew picture by pressing "MONITOR" button repeatedly, cycling through each video door station and camera. |
KB-DAR-M KB-DAR With Contacts for Remote Activation
|
KB-DAR With Contacts for Remote Activation
Allows any standard motion detector or activation device with a normally open contact to be interfaced with the KB-3MRD Video System. When the motion detector is tripped, the camera will turn on and a chime will be heard at the inside monitor station(s), indicating that there is some activity near the door station location. |





























