Ikegami
ICD-848 Color/Black & White Switchable 1/2" Digital Processing CCD CCTV Camera
The ICD-848[NTSC]/848P[PAL] is a multi-functional camera that can switchably output color and Black & White images according to changes in illumination. It is ideally suited for uses, such as around-the-clock surveillance in the open air where lighting cannot be installed, and In- hospital mo,nitorlng. In addition, the camera employs a high-sensitivity CCD with about 380,000 pixels (NTSC) or about 440,000 pixels (PAL), delIvering reduced smear, enhanced sensitivity, and high image quality. it helps achieve surveillance under various conditions, including indoor and traffic monitoring, at a high level of sophistication.
Features
High Sensitivity and Color/Black & White Switching
The camera can switchably deliver color and black & white video according to changes in the surrounding illumination. It achieves a minimum subject illumination of 0.15 lx/F1.4 in color and 0.015 lx/F1.4 in black & white. The switching mode can be selected from "Auto Mode" for automatic switching according to changes in illumination; "Remote Mode" for switching in response to an extraneous control signal; and "Manual Mode" for manual switching, to meet your needs. It is ideally suited for uses, such as around-the-clock surveillance in the open air where lighting cannot be installed, and in- hospital monitoring,
Low Smear
The camera features a high-sensitivity on-chip lens CCD to provide a smear level of -126dB. Appropriate video can be attained even when, for example, a car headlight is directly captured at night.
Spot Backlight Compensation
The camera is capable of specifying only a backlight area displayed on the screen and reproducing the backlight scene as an optimal image. Even when, for example, a car's number plate or a person is captured in a backlight situation, its image can be reproduced crisply.
Auto White Balance
In addition to Auto White Balance (ATW1) of auto-tracking type, the camera also features ATW2 that is compatible with sodium-vapor lamps used for lighting on highways and other purposes. Thus, it can capture optimal video under various conditions, both indoors and outdoors.
AES (Automatic Electronic Shutter)
The camera boasts AES capability with a sensitivity ratio of about 1:1600 (NTSC) or 1:2000 (PAL). Even with a fixed-aperture lens, the sensitivity can be adjusted appropriately according to changes in illumination of the surveillance area.
*These feature cannot be used in geographical regions where the line frequency and the camera's vertical frequency are different from each other.
High Picture Quality
It delivers 480 lines of horizontal resolution. Incorporating state-of-the-ar1 digital process circuitry, the camera can reproduce a rock- solid, sharp image.
Remote Setup
The pushbutton located on the rear of the camera allows various setups to be customized. With the aid of the RCU-701 Remote Control Unit or RSU-871 (RS-232 control), you can set up the camera installed on the top of the building or at any elevated place by use of the same cable as the video coaxial.
- Setup Function
Local Setup(Using 5 buttons and set on OSD(On Screen DiSplay) Color/Black & While Mode select/Level Adjusl, Camera ID, AES/Electronic Shutter. BLC ON OFF SPOT Level Adjust, GENLOCK Phase Adjusl, DO Iris Level, INT/LL, Delail Level, AGC ON/OFF, White Balarce, CROMA Level, PED Level, HUE, Operation Lock
- Remote Setup Function
With Using RCU-701 or RSU-871(Mutliplex transmission system), All Locai serup Functions are availabie
|
Specifications
| Pickup Device |
1/2" Interline Transfer CCD |
| Picture Elements |
NTSC768(H)X494(V), 380,000 pixels approx |
| PAL 752(H)X582(V), 440,000 pixels approx |
| Sync System |
Internal Crystal lock or Line-Lock(AC type) |
| External GENLOCK |
| GENLOCK Input |
VBS or VS 1-0vp-p /75 ohm (High impedance Switchable) |
| BBS 045vp-p /75 ohm (High impedance Switchable) |
| Video Output |
VBS 10vp-p / 75 ohm |
| Horizontal Resolution |
480TV Line |
| S/N Ratio |
52dB(p-p/rms) or more |
| (Under luminance, Standard Illumination, Detail off, Weight on) |
| Minimum Illumination |
0.15 Ix/F1.4(AGC ON) [Color Mode] |
| 0.015 Ix/F1.4(AGC ON) [Black & White Mode] |
| ColorlBlack & White Select |
AUTO/REMOTE/MANUAL Selectable |
| AGC |
ON(AGC, Hyper AGC)/OFF(LOW, MID, HIGH)Switchable |
| White Balance |
ATW/ATW2/AWC/MAN Selectable, Adjustable |
| Detail Compression |
Built-in (Level Adjustable) |
| Back Light Compensation |
ON/OFF/SPOT Switchabie |
| Automatic Electronic Shutter |
ON/OFF Switchable AES Range NTSC 1:1600 / PAL -1:2000 |
| (Unabie to wmk when power frequency does not meet vertical frequency of the camera) |
| Electronic Shutter |
OFF, 1/100(1/60 PAL), 1/125, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 VARIABLE |
| VARIABLE 1/60(1/50 PAL) - 1/100,000 |
| Auto Iris Function |
Video Iris/DC Iris Switchable |
| Camera ID |
Built-in 1 line, 16 characters |
| Lens Mount |
CS Mount(C mount Adaptor can be used) |
| Flange Back |
Built-in (Adjustment Mechanism) |
| Power Requirement |
AC24V ± 10% 60Hz / DC12V(10.5V-28V) (NTSC) |
| AC230V ± 15% 50Hz(PAL) |
| AC24V ± 10% 50Hz / DC12V(105V-28V) (PAL) |
| Power Consumption |
Less than 5W |
| Ambient Temperature |
-10°C to +50°C (13.6°F to 122.0°F) |
| Camera Mount |
1/4"-20UNC(Upper bottom select) |
| Dimensions |
W64XH54XD120mm(W2.52XH2.13XD4.73 inches) |
| Weight |
AC24V/DC12V: 580g Approx(1.28Ibs) |
| AC230V: 810g Approx(1.79Ibs) |
| Input Output Connector |
VBS Output: BNC |
| GENLOCK Input: BNC |
| LENS: 4P(E4-191J-100) |
| Color/Black & White Switchable Input: 2P push in terminal |
| AC24V/DC12V Input: 2P push in terminal |
| Accessories |
Operation Manual |
| C Mount Adaptor |
| Auto Iris Connector |
| (E4-191J-100 or Equivalent) |
|
