Ikegami ICD-808 1/3" Digital Processing CCD Color CCTV Camera

The ICD-808 NTSC 1/3" CCD features a high-sensitivity CCD imaging sensor with about 380,000 pixels (NTSC) or about 440,000 pixels (PAL), delivering reduced smear, enhanced sensitivity, and high image quality. The camera helps achieve surveillance under various conditions, such as indoor and traffic monitoring, at a high level of sophistication.

Features

• Low Smear and High Sensitivity
  The ICD-808/808P(1/3" CCD) employ a high-sensitivity on-chip lens CCD. The smear level is -110dB for the ICD-808/808P. They also achieve a high sensitivity with a minimum object illumination of 0.5 lx/F1.4 for the ICD-808/808P. These cameras are ideally suited for outdoor surveillance, such as traffic monitoring.
• Spot Backlight Compensation
  The camera is capable of specifying only a backlight area displayed on the screen and reproducing the backlight scene as an optimal image. Even when, for example, a car's number plate or a person is captured in a backlight situation, its image can be reproduced crisply.
• Auto White Balance
  In addition to Auto White Balance (ATW1) of auto-tracking type, the camera also features ATW2 that is compatible with sodium-vapor lamps used for lighting on highways and other purposes. Thus, it can capture optimal video under various conditions, both indoors and outdoors.
• AES (Automatic Electronic Shutter)
  The camera boasts AES capability with a sensitivity ratio of about 1:1600 (NTSC) or 1:2000 (PAL). Even with a fixed-aperture lens, the sensitivity can be adjusted appropriately according to changes in illumination of the surveillance area.
  *These features cannot be used in geographical regions where the line frequency and the camera's vertical frequency are different from each other.
• High Picture Quality
  It delivers 480 lines of horizontal resolution. Incorporating state-of-the-ar1 digital process circuitry, the camera can reproduce a rock- solid, sharp image.
• Remote Setup
  The pushbutton located on the rear of the camera allows various setups to be customized. With the aid of the RCU-701 Remote Control Unit >>>> or RSU-871 (RS-232 control), you can set up the camera installed on the top of the building or at any elevated place by use of the same cable as the video coaxial.
  • Setup Function
    Local Setup(Using 5 buttons and set on OSD(On Screen DiSplay) Color/Black & While Mode select/Level Adjusl, Camera ID, AES/Electronic Shutter. BLC ON OFF SPOT Level Adjust, GENLOCK Phase Adjusl, DO Iris Level, INT/LL, Delail Level, AGC ON/OFF, White Balarce, CROMA Level, PED Level, HUE, Operation Lock
  • Remote Setup Function
    With Using RCU-701 or RSU-871(Mutliplex transmission system), All Locai serup Functions are available