Ikegami ICD-38 1/3" CCD High Perfomance Black & White Camera

The ICD-38 is a high-performance monochrome camera employing a 1/3" OCML (On Chip Micro Lens) CCD sensor to deliver high resolution and high sensitivity, with a horizontal resolution of 0. 1 lux (fl.4). The ICD-38 incorporates a wide ranging AESC function which produces optimum image reproduction even without the use of an auto iris lens. In addition the ICD-38 features a switchable BLC (Back Light Compensation) as standard to ensure consistently stable image reproduction in situations involving back reproduction in situations involving back-lighting. The auto iris circuitry is selectable between VIDEO and DC iris allowing the use of either Video or DC drive lens. Furthermore the ICD-38 employs line lock with phase adjustment to facilitate multiple camera switching through a single video switcher.

Features

• High Seinsitivity
  High sensitive 1/3 inch CCD with a minimum illumination of 0.1 lux/ F1.4.
• Mirror Image
  Thanks to inverting a left and right image, ICD-38/38E can settle your reversed image problem with a prism or L-angle pinhole lens.
• AES and BLC
  Automatic Electronic Shutter (AES) and a hight quality Back Light Compensation (BLC) are featured.
• LL Lock
  The camera supports AC Line Lock.
• Auto Iris Function
  Selectable between Video auto iris, DC auto iris and Manual iris lenses.

Specifications

• Imaging Device: 1/3” Interline Transfer CCD
• No. of Effective Picture Elements: Approx. 250,000 pixels, 512 (H) and 492 (V) lines
• Sensing Area: 4.8 (H) x 3.6 (V) mm
• Horizontal Resolution: 380 lines
• Minimum Illumination: 0.07 lux/F1.2 (30 IRE) 0.35 lux/F1.2 (50 IRE)
• S/N Ratio: 48 dB/rms or better (at rated illumination)
• TV System: EIA, 2:1 interlace
• Sync System: Line lock (phase adjustable)
• Video Output: VS 1.0Vp-p/75 ½
• AES: Provided (on/off ), AES range 1:1600
• Backlight Compensation: On/Off, with level control
• Mirror Image: Provided (NOR/INV switchable)
• Auto Iris Function: Video iris/DC iris
• Flange Focal Distance Adjustment Function: Provided
• Lens Mount: CS mount
• Camera Mount: 1/4”-20UNC (top and bottom mounting)
• Ambient Operating Temperature: -10 to +50’C
• Power Supply: AC24V ±10%, 60Hz
• Power Consumption: Approx. 4W
• Input/Output Connectors:
  • Video output; BNC
  • AC24V input; 2-pin terminal block
  • Lens; 4-pin (applicable plug; E4-191J-100 or equivalent option)
• Outer Dimensions: 2.44” x 2.17” x 3.86” (WxHxD) (62 x 55 x 98 mm) (projections and accessories not included)