HID Corp (Hughes) MiniProx 5365 Proximity - 125 kHz Mullion Mount Proximity Readers

Overview
The MiniProx proximity card reader's potted electronics and slim, attractive design are ideal for indoor or outdoor mounting.

• Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
• Available with Wiegand or Clock-and-Data interface.
• Potted reader suitable for indoor or outdoor use.
• Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
• Accepts 5- to 16-volts, meeting most voltage requirements.
• Available with Wiegand or Clock-and-data interface.
• Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
• Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
• Mounts directly onto metal with no change in read range performance.
• Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.

Specifications

• Typical maximum* read range
  – ProxCard® II Card - up to 5.5" (14 cm)
  – ISOProx® II Card - up to 5" (12.7 cm)
  – DuoProx® II Card - up to 5" (12.7 cm)
  – Smart ISOProx®/DuoProx® cards - up to 5" (12.7 cm)
  – Proximity & MIFARE® Card - up to 5" (12.7 cm)
  – ProxCard Plus® Card - up to 2" (5.1 cm)
  – ProxKey® II Keyfob - up to 2" (5.1 cm)
  – MicroProx® Tag - up to 2.5" (6.4 cm)
  *Depending on local installation conditions.
• Dimensions: 6.0" x 1.7" x 1.0" (15.2 x 4.3 x 2.54 cm)
• Power Supply
  – Standard MiniProx: 5-16 VDC
  – Haz. Loc. MiniProx: 5-16 VDC
  – Linear power supplies are recommended.
• Current Requirements: Current (DC):
  Average: 30 mA (5 VDC); 20 mA (12 VDC)
  Peak: 110 mA (5 VDC); 110 mA (12 VDC)
• Operating Temperature: -22º to 150º F (-30º to 65º C)
• Operating Humidity: 0-95% relative humidity noncondensing
• Weight:
  With terminal strip: 3.5 oz. (99 gm)
  With pigtail: 3.8 oz. (108 gm)
  Haz. Loc. MiniProx: 3.8 oz. (108 gm)
• Cable Distance:
  Wiegand interface: 500 feet (150 m)
  Clock-and-data interface: 50 feet (15 m)
  Recommended cable is ALPHA 1295 (22 AWG)
  5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
• Certifications
  – Canada/UL 294 Listed: Access Control System Units Canada/UL 1604 Listed (with Haz. Loc. junction box only): Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
  – FCC Certification, United States
  – Canada Certification
  – EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
  – Fifteen EU Countries under the R&TTE Directive (EN 300330 - SRD, and ETS 300 683 - EMC)
  – CE Mark
  – Australia C-Tick
  – New Zealand

How to Order Guide

*Revision numbers and availability are subject to change without notice.

Notes:
¹Configuration Setting Options are as follows (factory programmed):
  00 = Beep on, LED normally red, reader flashes green on tag read
  01 = Beep off, LED normally red, reader flashes green on tag read
  02 = Beep on, LED normally off, reader flashes green on tag read
  03 = Beep off, LED normally off, reader flashes green on tag read
  04 = Beep on, LED normally red, host must flash green
  05 = Beep off, LED normally red, host must flash green
  06 = Beep on, LED normally off, host must flash red and/or green
  07 = Beep off, LED normally off, host must flash red and/or green

²Consult Factory

³An optional 9 foot pigtail is available through our HID European office and can also be available in the Americas and Asia Pacific regions via special order of 2,500 unit minimum order quantity. Please call the HID factory for pricing and lead-times.