HID Corp ProxPro 5355AGK09 Proximity Reader with Keypad

125 kHz Keypad Proximity Card Reader. The ProxPro proximity card reader's weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range.

Features

• Ideal for medium-range applications.
• Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
• Sealed for indoor or outdoor use.
• Optional glass mount kit available for mounting the reader behind glass.
• Power requirements: 10-28.5 VDC.
• Current requirements: 100mA avg / 120mA peak.
• Dimensions: 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm).
• Available in gray or beige.
• Base part numbers: 5355 (Wiegand), 5352 (Serial), 5358 (Clock-and-Data).
• Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix.

Specifications

• Typical maximum* read range:
  ProxCard® II card - up to 8" (20 cm)
  ISOProx® II card - up to 7" (17.5 cm)
  DuoProx® II card - up to 7" (17.5 cm)
  Smart ISOProx® II card - up to 7" (17.5 cm)
  Smart DuoProx® II card - up to 7" (17.5 cm)
  HID Proximity & MIFARE® card - up to 7" (17.5 cm)
  ProxCard® Plus card - up to 3" (7.5 cm)
  ProxKey® II keyfob - up to 3" (7.5 cm)
  MicroProx® Tag - up to 4" (10.2 cm)
  ProxPass® Active Vehicle Tag - N/A
  *Depending on local installation conditions.
• Dimensions: 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
• Material: Polycarbonate UL 94
• Power supply: 10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
• Current requirements: Average: 100 mA (12 VDC) Peak: 120 mA (24 VDC)
• Operating temperature: -22º to 150º F (-30º to 65º C)
• Operating humidity: 0-95% relative humidity non-condensing
• Weight: 12 oz. (336 gm)
• Transmit frequency: 125 kHz
• Excite frequency: 125 kHz
• Cable distance:
  Wiegand or Clock and Data interface: 500 feet (152 m)
  RS-232 interface: 50 feet (15 m)
  RS-422 interface: 4000 feet (1219 m)

Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
Additional conductors may be required for LED or beeper control.
RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.