2520 Acoustic Glassbreak Detector

• 8 bit microprocessor analyzes the audio signal produced by breaking glass
• Mounts on any wall or ceiling in direct line of sight of glass
• 25' range
• UL listed for all types of glass: plate, laminated, tempered or wired
• Alarm memory is jumper selectable
• SPDT relay for open or closed circuit
• Test period automatically times out after 5 minutes

5800SS1 Wireless Shock Sensor

The 5800SS1 Wireless Shock Sensor mounts directly on glass surfaces. It provides excellent detection for all types of glass while eliminating false alarms. It is intended for use with ADEMCO’s 5800 wireless systems only. The 5800SS1 is especially effective in acoustically hard, reverberant rooms like kitchens, bathrooms and laundry rooms that are prone to false alarms. Since it is a shock sensor, the 5800SS1 is immune to the sounds that cause false alarms. Installation is a snap, just pull the battery tab to enroll the transmitter, peel the adhesive backing and mount. There’s no need to open the case for any reason except to change the battery years later.

5819 Shock Processor and Transmitter

• Provides three zones for total protection
  - Closed loop shock sensing and processing
  - External contact loop
  - 2 built-in reed switches for vertical or horizontal mounting
• Adjustable pulse count and response sensitivity settings to meet demanding application requirements
• Includes replaceable lithium batteries

Note: Requires ASC-SS1 Shock Sensor

5853 Wireless Glassbreak Detector

ADEMCO’s 5853 Wireless Glassbreak Detector offers uncompromised performance and unmatched false alarm immunity. The FlexCore™ signal processor utilizes an Application Specific Integrated Circuit (ASIC)—processing sound data in parallel rather than sequentially. This permits sound frequency, duration and amplitude to be analyzed 50% faster to minimize false alarms while maintaining the highest possible level of detection. The 5853 can be mounted on any wall or ceiling within a 25’ range, with no minimum range limitation. The LEDs indicate test mode, alarms and trouble conditions. It is compatible with all 5800 series wireless devices.

ASC-SS1 Glassbreak Shock Sensor - Ademco

The ASC-SS1 shock sensor protects all types of glass: plate, wired, tempered, and laminated. The sensor will protect the glass within an 8 feet radius from the sensor for glass up to 1/4 inch thick. The ASC-SS1 mounts directly to the glass surface and is wired to a two wire powered protective loop.

FG-1625SN V-Plex Glassbreak Detector - Ademco

The new FG1625SN Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG1625SN is specifically designed to allow a fast, easy installation by utilizing V-Plex polling loop technology. Four adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. This device is designed for use only with controls supporting V-Plex (polling loop) technology.

FG-1608 Glassbreak Detector with ValueGap® Magnetic Contact - IntelliSense

The FG-1608 is a combination glassbreak detector and magnetic contact that gives you two sensors in one for maximum versatility, performance and value.

IntelliSense FG-1625 Glassbreak Detector

IntelliSense FG-1625F Flush Mount Glassbreak Detector

The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.

IntelliSense FG-1625R Glassbreak Detector

The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

Honeywell FG1625RFM Glass Break Detector, Round, Flush Mount

The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG701 Glassbreak Simulator.

FG 701 Glassbreak Simulator - IntelliSense

Compatible with all IntelliSense and ADEMCO brand glassbreak detectors

• Calibrated signal output to allow true range verification
• Remote test-mode activation – works from 15 ft away*
• Low battery voice announcement
• Digitally produced glassbreak sound

*when used with IntelliSense FG1500 and FG-1600 series detectors

IntelliSense FG-730 Glassbreak Detector

IntelliSense's FlexGuard® FG-730 incorporates the most reliable, field-proven technology available – setting the industry standard in glassbreak detectors.

IntelliSense FGW-1525 Wireless Glassbreak Detector

IntelliSense’s FGW-1525 combines the benefits of wireless glassbreak detection with FlexCore™ signal processing for superior false alarm immunity. It is compatible with all major brand wireless transmitters.

Sentrol 5812NT ShatterPro 3 Acoustic Glass Break Detector

The Sentrol 5812NT Series ShatterPro 3 is the latest breakthrough in Sentrol's advanced series of acoustic glassbreak sensors. In lab tests, ShatterPro 3 provides 25 percent better false-alarm immunity than the popular ShatterPro II. The coverage pattern can be easily adjusted to fit small or large rooms. Interference outside the range will not cause false alarms.

Sentrol 5812RND ShatterPro 3 Acoustic Glass Break Detector: Round

The Sentrol 5812NT Series ShatterPro 3 is the latest breakthrough in Sentrol's advanced series of acoustic glassbreak sensors. In lab tests, ShatterPro 3 provides 25 percent better false-alarm immunity than the popular ShatterPro II. The coverage pattern can be easily adjusted to fit small or large rooms. Interference outside the range will not cause false alarms.

GE Security 5820A Recessed Shatterpro Glassbreak Sensor, 1" Recessed Mounting

The 5820A Series Recessed ShatterPro II is designed for use when sensor appearance is a consideration. The 5820A recessed model can be mounted directly into the wall or ceiling or can be used with the single gang box accessory. A trim ring is included.

GE Sentrol 5885-W Motion Sensitive Accoustic Sensor, UL Listed. 24 Hr Applications

The ShatterPro™ Plus is an acoustic glassbreak sensor combined with a passive infrared motion detector (PIR) for the purpose of eliminating occupant generated false alarms. It will extend acoustic glassbreak technology to occupied areas, allowing these sensors to be armed while people or pets are present. Simply put, when a person enters the field of view of the motion detector the glassbreak sensor is shunted during the period of occupancy. This eliminates false alarms generated from normal noise levels during occupied hours at work or at home. The ShatterPro™ Plus can be wired into a 24-hour perimeter loop, free from concerns about false alarms generated by a noisy environment.

5150 Glass Shock Sensor - GE Security

The 5150 Shock Sensor is one of the most low profile sensors in the industry. Advanced piezo transducer technology powers the sensor, so no power is needed from the loop. Instead, the piezo generates its own electricity when it bends as the glass breaks. Bending of the transducer must occur for the sensor to go into alarm providing excellent false alarm immunity.

5150CW Glass Shock Sensor with Coiled Cord - GE Security

The 5150 Shock Sensor is one of the most low profile sensors in the industry. Advanced piezo transducer technology powers the sensor, so no power is needed from the loop. Instead, the piezo generates its own electricity when it bends as the glass breaks. Bending of the transducer must occur for the sensor to go into alarm providing excellent false alarm immunity.