| CCTV Video Surveillance > IFS - International Fiber Systems > Fixed Video | ![]() |
|
IFS Fixed Video | ||
| VR1000 Video Receiver with Manual Gain |
| The IFS VR1000 video receiver detects an AM video signal on one multimode optical fiber. The VR1000 utilizes manual gain control. The receiver is compatible with the IFS VT1101M, VT1101M-AC, and VT1001 series transmitters. Plug-and-play design ensures ease of installation. The receiver incorporates a power status indicating LED for monitoring proper system operation. The module is available in a stand-alone version only. |
| VR1001 Dual Independent Video Receivers With Manual Gain |
| The IFS VR1001 dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack-mount version can be used to double the fixed video capacity of the R3 rack for up to 28 independent video channels per card cage. The modules utilize manual gain control. The receiver is compatible with the IFS VT1101M, VT1101M-AC, and VT1001 series transmitters. Plug-andplay design ensures ease of installation. The module incorporates power and sync detect status indicating LED’s for monitoring proper system operation. The module is available in either stand-alone or rack mount version. |
VR1001 Dual Independent Video Receivers With Manual Gain
NULL
VR1001-R3 Dual Independent Video Receivers With Manual Gain
NULL
| VR2100 Series Dual Independent Video Receivers with Automatic Gain Control (AGC) |
| The IFS VR2100 series dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is ideal for smaller CCTV installations and the rack mount version can be used to double the fixed video capacity of the R3 rack for up to 28 independent video channels per card cage The receiver utilizes automatic gain control (AGC). The receiver is compatible with the IFS VT1101M, VT1101M-AC, and VT1001 series transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The receiver incorporates a power and AGC status indicating LED’s for monitoring proper system operation. The module is available in either stand-alone or rack mount version. |
VR2100 Dual Independent Video Receivers with Automatic Gain Control (AGC)
NULL
VR2100-R3 Dual Independent Video Receivers with Automatic Gain Control (AGC)
NULL
| VR4000 Series FM Video Receivers |
| The IFS VT/VR4000 Video Transmitter and Receiver series utilizes frequency modulation for transmission quality that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of NTSC, PAL, or SECAM video over one multimode or singlemode fiber optic cable and are ideal for use in unconditioned out-of-plant or roadside installations. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone or rack mount configurations. |
| VT1000AC Series Mini Video Transmitter (24VAC) |
| The IFS VT1000AC series video transmitter provides transmission of a fixed video signal using AM modulation on one multimode fiber optic cable. The transmitter includes a built-in isolation transformer allowing both the camera and fiber optic transmitter to be powered by the same 24VAC power supply. The VT1000AC video transmitter is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 series receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a power status indicating LED for monitoring proper system operation. The transmitter is available in a stand-alone version only. |
| VT1001 Series Dual Independent Video Transmitters |
| The IFS VT1001 series dual video transmitter provides transmission of two independent fixed video signals in one module utilizing AM modulation on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack-mount version can be used to double the fixed video capacity of the R3 rack for up to 28 independent video channels per card cage. The VT1001 is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 series receivers. Plug-andplay design ensures ease of installation requiring no electrical or optical adjustments. The module incorporates a power and channel A and B sync detect status indicating LED’s for monitoring proper system operation. The module is available in either stand-alone or rack mount version. |
| VT1101M Series Mini Video Transmitters (Direct Camera Mount) |
| The IFS VT1101M video mini-transmitter supports the simultaneous transmission of a fixed video signal using AM modulation and one contact closure on one multimode fiber optic cable. This contact closure allows an additional device such as a dome tamper switch or alarm event input to be added and its signal transmitted back to the monitoring location. The transmitter is direct camera mountable eliminating the use of coaxial cable at the camera connection and will fit in most camera housings. A BNC feed-through coupler is also supplied to connect to coaxial cable when not mounting the module directly to the camera. The VT1101M video transmitter is compatible with the IFS VR1000, VR1001, VR1100, VR2100 and VR1100CC receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a power status indicating LED for monitoring proper system operation. The transmitter is available in a stand-alone version only. |
VT1101M Mini Video Transmitters (Direct Camera Mount)
NULL
| VT1101M-AC Camera Powered Mini Video Transmitter |
| The IFS VT1101M-AC series video transmitter provides transmission of a fixed video signal using AM modulation on one multimode fiber optic cable. The transmitter includes a built-in isolation transformer allowing both the camera and fiber optic transmitter to be powered by the same 24VAC power supply. The VT1101M-AC video transmitter is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 series receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. |
VT1101M-AC Camera Powered Mini Video Transmitter
NULL
| VT14100 Series 10-bit Digitally Encoded Video Transmitters |
| The IFS VT/VR14100 series video transmitter and video receiver units utilize state-of-the-art 10-bit digital encoding and decoding for true broadcast-quality video transmission that exceeds the requirements of EIA RS-250C for Short-Haul Video Transmission. These environmentally hardened units provide transmission of video over one singlemode or multimode fiber optic cable and are ideal for use in unconditioned road side or out-of-plant installations. As the level of video performance is so high, the VT/VR14100-series is ideally suited to networks employing multiple physical layers where video degradation may be problem, such as FDM or digitally encoded video multiplexing links, T-1 or fractional T-1 codecs, and SONET or ATM backbones. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone or rack mount configurations. |
VT14120 10-bit Digitally Encoded Video Transmitters
NULL
VT14120-R3 10-bit Digitally Encoded Video Transmitters
NULL
VT14130 10-bit Digitally Encoded Video Transmitters
NULL
VT14130-R3 10-bit Digitally Encoded Video Transmitters
NULL
| VT4000 Series FM Video Transmitters |
| The IFS VT/VR4000 Video Transmitter and Receiver series utilizes frequency modulation for transmission quality that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of NTSC, PAL, or SECAM video over one multimode or singlemode fiber optic cable and are ideal for use in unconditioned out-of-plant or roadside installations. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone or rack mount configurations. |
| VT4000M Series FM Mini Video Transmitters |
| The IFS VT4000M video mini transmitter transmits a fixed video signal using frequency modulation (FM) on one single-mode or multimode fiber optic cable. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a power status indicating LED for monitoring proper system operation and is available in a standalone version only. |

































