MS-2 Two-Zone Fire Alarm Control Panel

Fire•Lite's MS-2 and MS-4 Fire Alarm Control Panels bring the latest in microprocessor technology to conventional fire controls. The MS-2 is compatible with the new I3 smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances.. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.

FireLite MS-4 Four Zone Fire Alarm Control Panel

The Fire•Lite MS-4 Fire Alarm Control Panel brings the latest in microprocessor technology to conventional fire controls. The MS-4 is compatible with the new I3 smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using three selections for manufacturer protocol. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.

FireLite MS-10UD-7 Ten Zone Fire Alarm Control Panel

The MS-5UD-3(E) is a five-zone FACP (Fire Alarm Control Panel) and the MS-10UD-7(E) is a ten-zone FACP. These control panels provide reliable fire signaling protection for small to medium-sized commercial, industrial, and institutional buildings. Both panels include built-in communicators for Central Station Service and remote upload/download.

FireLite MS-5UD-3 Five Zone Fire Alarm Control Panel

The MS-5UD-3(E) is a five-zone FACP (Fire Alarm Control Panel) and the MS-10UD-7(E) is a ten-zone FACP. These control panels provide reliable fire signaling protection for small to medium-sized commercial, industrial, and institutional buildings. Both panels include built-in communicators for Central Station Service and remote upload/download.

FireLite MS-9050UD 50-Point Intelligent Fire Alarm Control Panel

Sophisticated Performance at the Cost of Conventional System. The MS-9050UD Fire Alarm Control Panel offers state-of-the-art technology with easy installation, operation, and maintenance. Suited for stand-alone applications, the MS-9050UD is ideal for smaller facilities such as apartment complexes, banks, cinemas, child care and elementary schools, department stores, food stores, places of worship, restaurants and small retail outlet stores.

FireLite MS-99200UDLS 198-Point Intelligent Fire Alarm Control Panel

Fire-Lite's MS-9200UDLS Intelligent Addressable Fire Alarm System with new LiteSpeedTM SLC protocol is ideal for small to medium facilities.

MS-9600 Rev. 2/DACT-UD Intelligent Addressable FACP with Optional 2nd Loop

The Fire•Lite MS-9600 is a compact, cost-effective, intelligent addressable fire alarm control panel with a capacity of 318 addressable Fire•Lite devices on one Signaling Line Circuit (SLC) or a total of 636 addressable points with an optional second loop (SLC-2). An optional 14.4K Baud modem (DACT-UD) is available for remote site upload/download and/or remote monitoring.

ACC-25/50 Emergency Voice Evacuation Control

The Fire•Lite ACC-25/50 is a state-of-the-art, single or dual amplifier (25 watts each) Emergency Voice Evacuation Control (EVAC) panel. The panel provides the ability to record five field programmable messages (up to 60-seconds or total message duration) with an integral microphone of from an external audio source. Significant technological enhancements set the ACC-25/50 apart from other EVAC panels. These enhancements include full supervision in both active (alarm or music) and standby conditions, supervision of amplifier outputs, field wiring, message generators, all tone generators and the microphone. The integral power supply is capable of charging up to 18 Amp hour batteries, which can be housed in the ACC-25/50 cabinet.

ACC-25/50ZS - Audio Command Center
25/50 Zone Splitter Voice Evacuation Control Panel

The Audio Command Center•25/50 Zone Splitter System (ACC-25/50ZS) is a state-of-the-art Emergency Voice Evacuation Panel (EVAC) capable of splitting up to 50 watts of audio power into up to eight zones. The ACC•25/50ZS provides the ability to record five field-programmable messages (up to 60 seconds total message duration) with an integral commercialgrade emergency communications microphone or from an external audio source. Significant technological enhancements set the ACC•25/50ZS apart from other EVAC panels — these include full supervision in both active alarm and standby conditions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the ACC•25/50ZS cabinet.

FC 25/50 Distributed Audio Emergency Voice Evacuation Control

The Fire•Lite FIRE•COMMAND•25/50DA is a state-of-the-art, compact, Distributed Audio (DA) panel. The FIRE•COMMAND•25/50DA is offered in a self-contained, cost-effective design and includes a 25 Watt, 25 VRMS audio amplifier and integral tone generator. Additionally, an optional digital message generator module provides a factory-prerecorded voice announcement and field record and playback capability.

FireLite MRP-2001 Deluge/Preaction Control Panel

The MRP-2001 is a six-zone FACP for single and dual hazard deluge and preaction applications. The MRP-2001 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing. The MRP-2001 is compatible with System Sensor's i3 detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory 'freeze' signal when the ambient temperature falls below the detector rating of approximately 45ºF (7.22ºC). In addition, the control panel is compatible with conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Refer to the Fire·Lite Device Compatibility Document for a complete listing of compatible devices.

411 and 411UD Digital Alarm Communicator Transmitters (DACT)

The Fire-Watch 411 Series from Fire•Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

411 and 411UD Digital Alarm Communicator Transmitters (DACT)

The Fire-Watch 411 Series from Fire•Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

411UDAC Digital Alarm Communicator Transmitters (DACT)

The Fire-Watch 411UDAC from Fire•Lite is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two- and four-wire smoke detectors, pull stations, and other normally-open contact devices. The 41UDAC is a cost-effective solution for applications that require an existing (or new) fire alarm control or non-fire control panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

UDACT-F Digital Alarm Communicator Transmitters (DACT)

The UDACT-F is compact in size and may be mounted inside the host control panel or may mount externally in a separate cabinet. EIA-485 annunciator communications bus and regulated 24-volt connections are required. The UDACT-F transmits 198 points or 56 zones when connected to the MS-9200, up to 636 points or 98 zones when connected to the MS-9600, and 56 zones when connected to the Sensiscan 2000.

CHG-120F Remote Battery Charger (120 AH)

The Fire•Lite CHG-120F is a state-of-the-art battery charging system designed for use with the Fire•Lite MS-9600, MS-9200 (requires MS-9200 circuit board #71741) and the Sensiscan 2000. It is designed to charge lead-acid batteries between 25 and 120 ampere-hours (AH).

CHG-75 State-of-the-Art Charging System (25&75 AH)

The Fire•Lite CHG-75 is a state-of-the-art battery charging system designed for use with the Fire•Lite MS-9600, MS-9200 and the Sensiscan 2000. * Has built-in monitor module for direct connection to the MS-9200UD or MS-9600 SLC loop. It is designed to charge lead-acid batteries between 25 and 75 ampere-hours (AH).

FireLite FCPS-24FS6 NAC Power Supply

The FCPS-24FS6 is a compact, cost-effective, 6-amp remote power supply with battery charger. The FCPS-24FS6 may be connected to any 12- or 24-volt Fire Alarm Control Panel (FACP) or may be stand alone. Primary applications include Notification Appliance (bell) Circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24-volt system accessories. The FCPS-24FS6 provides regulated and filtered 24 VDC power to four Notification Appliance Circuits configured as either four Class B (Style Y) or Class A (Style A, with ZNAC-4 option module). Alternately, the four outputs may be configured as all non-resettable or all resettable or two non-resettable and two resettable. The FCPS-24FS6 also contains a battery charger capable of charging up to 18 Amp Hour batteries.

FireLite FCPS-24FS8 NAC Power Supply

The FCPS-24FS8 is a compact, cost-effective, 8-amp remote power supply with battery charger. The FCPS-24FS8 may be connected to any 12- or 24-volt Fire Alarm Control Panel (FACP) or may be stand alone. Primary applications include Notification Appliance (bell) Circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24-volt system accessories. The FCPS-24FS8 provides regulated and filtered 24 VDC power to four Notification Appliance Circuits configured as either four Class B (Style Y) or Class A (Style A, with ZNAC-4 option module). Alternately, the four outputs may be configured as all non-resettable or all resettable or two non-resettable and two resettable. The FCPS-24FS6 also contains a battery charger capable of charging up to 18 Amp Hour batteries.

FireLite BB-26 Battery Back Box

FireLite BB-55F Battery Back Box

FireLite BB-6F Optional cabinet for up to six modules mounted on CHS-6 chassis

FireLite CHS-6: Chassis, Mounts up to Six Multi-modules in a BB-6F Cabinet

FireLite DP-51050 Optional Dress Panel

FireLite PRN-6F UL Listed Compatible Event Printer

Uses tractor-fed paper.

FireLite PRT/PK-CABLE Printer/Personal Computer Interface Cable

FireLite TR-CE Trim Ring for Semi-Flush Mount, Red