ELK-M1G Gold Home Automation System 4

• ELK M1G Gold Controller
• Power Transformer
• ELK-M1KP Custom English LCD Keypad
• ELK-1270 12-Volt, 8AH Backup Battery
• ELK Siren Speaker
• RJ31X Telephone Jack & Cord

• Backlit, Large Character LCD Display: 16 x 2 lines
  
• Built-in Temperature Sensor
  
• Optional Plug-in Prox Access reader (26 bit Weigand format)
  
• Menu navigation keys and 6 programmable function keys
  
• Plug-in connector: Only 4 wires to the control
  
• 1 Zone Input and 1 Output Programmable per Keypad
  
• Programmable display of time, date and temperature
  
• Displays system diagnostics and settings

ELK-TS07 7" Touchscreen: Total Control at Your Fingertips

The ELK-TS07 is a 7" touchscreen that operates with M1 or EZ8 controls. It features a bright TFT display, powerful microprocessor, and built-in ElkRM Remote Management Software to satisfy the most discriminating taste. The easy to use graphical interface is designed to simplify the operation of both automation and security.

ELK-M1DBH M1 Data Bus Hub

For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.

ELK-M1PR Keypad Plug-in Proximity Reader

Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs.

ELK-M1RB M1 Relay Board

Plug-in (8 form ”C” relays). May be plugged directly into an M1, M1G, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125 VAC.

ELK-M1XIN M1 16 Zone Input Expander

ELK-M1XOV M1 16 Output Expander, Flying Voltage Leads

Adds 16 voltage outputs to M1 or M1G Control. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).

ELK-M1XOVR 16 Output expander, 8 Voltage/8 Relays

Adds 16 outputs (8 voltage, 8 relays) to M1 or M1G Control. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.

ELK-M1TS Temperature Sensor: -40º to +150º F

ELK Products ELK-M1ZTS M1 Zone Temperature Interface with Sensor: Includes Short Probe

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

ELK Products ELK-M1ZTSR M1 Zone Temperature Interface with Sensor: Includes Short Probe

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

ELK Products ELK-M1TWI Two Way Listen-In Interface For ELK-M1Gold

Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the Central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected.

ELK Products ELK-M1TWM M1 Two Way Microphone

Microphone only for use with the ELK-M1TWI or ELK-M1EZ8TWI two way listen-in interface. Up to 12 microphones total may be connected.

ELK Products ELK-M1TWS M1 Two Way Speaker/Microphone

Microphone and 20 Watt Speaker combination for use with the ELK-M1TWI and ELK-M1EZ8TWI Two Way Listen-in interfaces. Requires 4 conductor cable. Up to 12 may be connected.

ELK-M1XEP M1 Ethernet Interface

Control home or business from a PC browser, anywhere!

The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.

ELK-M1XSP Lighting/Thermostat Interface, Serial Port Expander

This is a "3 in 1" product. As a lighting interface, it adapts the M1 Control to many brands of Lighting control products which use "serial" communications. i.e.,OnQ-ALC, PCS-UPB, EDT, CENTRALITE, VANTAGE, etc. As a thermostat interface, it adapts the M1 Control to HVAC Communicating Thermostats from companies such as:RCS, APRILAIRE, and HAI. As a serial port expander, it expands the RS-232 communication ports of the M1 for multiple connections to most any type of equipment that communicates using serial ASCII commands. i.e., Personal Computers and high end whole house subsystems such as: CRESTRON, AMX, etc. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1G (Gold) Cross Platform Control supports up to 7 M1XSPs while the M1 (Std) supports 1 M1XSP. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.

ELK-M1XZW Z-Wave Enabled Device Controller

The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats

Comprehensive 810 VIDEO/S-VIDEO COLOR BAR & AUDIO TONE GENERATOR.

Comprehensive 819 WEST PENN RG59/U SDI NON PLENUM

GE Security NX-695 Wireless Flood / Water Leak Detector

The Caddx NX-695 water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.

GE Security 4 Button Keyfob Transmitter from GE Interlogix

These small, powerful touchpads provide convenient portable control over security system, lights, panic, and garage door functions of your security system. Features: Light control capability, Auxiliary panic button, Key chain ring included, Specifications, Color: Black Dimensions: 1.4" wide, 2.25" high, .38" deep Battery: 12 VDC, 33 mAh alkaline battery (included) Battery life: 5-8 years Operating temp: 10°-120°F

GE Security Pendant Panic Button from GE Interlogix

Designed to go just about anywhere, this sensor allows you to activate a 24-hour emergency alarm whether your at home, in the yard, or in the shower. Features: Water and shock resistant. Recessed panic button prevents false alarms Can be worn around neck. Built-in belt clip allows sensor to be attached to belt or purse. Specifications: Necklace cord (included), belt clip (included), and wall mounting (bracket sold separately) Color: White Dimensions: 1.75" wide, 2.25" high, .75" deep Batteries: 3.5 VDC 1/2 AA Lithium Battery.