ELK Products ELK-M1EZ8KBS EZ8 Kit - Board in 12" Can w/Transformer, LCD KP2, 5Ah Battery, SP35 Speaker, RJSET

ELK Products ELK-M1EZ8KS EZ8 Kit (KB) in Cardboard only (NO CAN) with M1KP2

ELK-M1EZ8K Control + Transformer + Keypad + Battery + Speaker + RJ31X Jack & Cord

ELK-M1EZ8KB Control + Transformer + Keypad + Battery + Speaker + RJ31X Jack & Cord + 12" x 12" Enclosure

• Backlit, Large Character LCD Display: 16 x 2 lines
  
• Built-in Temperature Sensor
  
• Optional Plug-in Prox Access reader (26 bit Weigand format)
  
• Menu navigation keys and 6 programmable function keys
  
• Plug-in connector: Only 4 wires to the control
  
• 1 Zone Input and 1 Output Programmable per Keypad
  
• Programmable display of time, date and temperature
  
• Displays system diagnostics and settings

ELK-TS07 7" Touchscreen: Total Control at Your Fingertips

The ELK-TS07 is a 7" touchscreen that operates with M1 or EZ8 controls. It features a bright TFT display, powerful microprocessor, and built-in ElkRM Remote Management Software to satisfy the most discriminating taste. The easy to use graphical interface is designed to simplify the operation of both automation and security.

ELK-M1DBH M1 Data Bus Hub

For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.

ELK-M1PR Keypad Plug-in Proximity Reader

Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs.

ELK-M1PRC Proximity Access Cards (10-pack)

The Elk M1PRC Proximity Card allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access. The Elk M1PRC Proximity Card is designed to be used in conjunction with an Elk M1PR Mini Proximity Reader that is installed internally in an Elk M1 LCD Keypad and are read in a highly secure, 26 bit Weigand format.

ELK-M1PRF Proximity Key Fobs (10-pack)

The Elk M1PRF Key Fob allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access.

ELK-M1RB M1 Relay Board

Plug-in (8 form ”C” relays). May be plugged directly into an M1, M1G, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125 VAC.

ELK-M1TS Temperature Sensor: -40º to +150º F

ELK Products ELK-M1TWI Two Way Listen-In Interface For ELK-M1Gold

Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the Central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected.

ELK Products ELK-M1TWS M1 Two Way Speaker/Microphone

Microphone and 20 Watt Speaker combination for use with the ELK-M1TWI and ELK-M1EZ8TWI Two Way Listen-in interfaces. Requires 4 conductor cable. Up to 12 may be connected.

ELK-M1XEP M1 Ethernet Interface

Control home or business from a PC browser, anywhere!

The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.

ELK-M1XIN M1 16 Zone Input Expander

ELK-M1XOV M1 16 Output Expander, Flying Voltage Leads

Adds 16 voltage outputs to M1 or M1G Control. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).

ELK-M1XOVR 16 Output expander, 8 Voltage/8 Relays

Adds 16 outputs (8 voltage, 8 relays) to M1 or M1G Control. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.

ELK-M1XSP Lighting/Thermostat Interface, Serial Port Expander

This is a "3 in 1" product. As a lighting interface, it adapts the M1 Control to many brands of Lighting control products which use "serial" communications. i.e.,OnQ-ALC, PCS-UPB, EDT, CENTRALITE, VANTAGE, etc. As a thermostat interface, it adapts the M1 Control to HVAC Communicating Thermostats from companies such as:RCS, APRILAIRE, and HAI. As a serial port expander, it expands the RS-232 communication ports of the M1 for multiple connections to most any type of equipment that communicates using serial ASCII commands. i.e., Personal Computers and high end whole house subsystems such as: CRESTRON, AMX, etc. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1G (Gold) Cross Platform Control supports up to 7 M1XSPs while the M1 (Std) supports 1 M1XSP. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.

ELK Products ELK-M1ZTSR M1 Zone Temperature Interface with Sensor: Includes Short Probe

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

WO35A M1 Accessory Wire Harness

For use with the ELK-M1 Security, Automation & Phone Control System. The ELK-W035A 5-pin cable is required for connecting the wireless receivers (models NX408E, 416E, or 448E) to the M1 or M1G Control. It can also be used to connect another manufacturer’s proximity reader (26bit Weigand format) to a M1KP keypad. Wire Length = 18”

Paradox DG-75 High-Security Digital Motion Detector with Pet Immunity

• Extremely reliable and false-alarm free
• Dual optics (2 dual opposed element sensors)
• Provides superior pet immunity using a patented combination of advanced optics and digital processing technologies
• Immune to pets weighing up to 40kg (90lbs)
• Digital Dual Opposed Detection (see page 7)
• 11m (35ft) X 11m (35ft); 90º viewing angle
• Features and specifications common to all digital motion detectors

The PetSmart NEXTDUOK Pet-Immune Dual Technology Detector: 80 lbs (K-980D) PIR/Microwave dual technology detector is a state-of-the-art pet immune detector. It offers immunity to pets weighing up to 36 kg (80 lb) with 12 x 12 m (40 x 40 ft) coverage. It can be wall or corner mounted for residential and commercial applications and comes with an integral swivel bracket. The K-980D operates with Visonic Ltd's TMR™ - True Motion Recognition signal processing and has triple event count protection, advanced system diagnostics and microwave supervision. (VS-K980D)

Visonic Spy 1 Inconspicuous Long-Range Miniature PIR Motion Detector

Spy 1 is the world's smallest detector offering inconspicuous protection for corridors and passageways as well as control of CCTV, access control and similar systems. It can be flush-mounted in a wall or installed from behind the wall, providing a single, double beam with coverage of up to 11m/17o (35ft/17o).

Visonic Spy 2 Inconspicuous, Medium Angle, Miniature PIR Motion Detector

Spy 2 is the world's smallest detector offering inconspicuous protection for rooms, wide corridors and passageways as well as control of security, CCTV and other systems. It can be flush-mounted in a wall or installed from behind the wall, providing a coverage of three double beams in a single detection layer, with a maximum coverage area of 8m/50º (25ft/50º).

Visonic Spy 3 Concealed Wide-Angle Miniature PIR Motion Detector

Spy 3 is the world's smallest detector offering concealed protection for rooms and supporting various other control and access applications. It is flush-mounted in a wall, providing coverage of six double-beams in a single detection layer, with a maximum coverage area of 8m/100° (25ft/100°).

Visonic Spy 4 Inconspicuous Miniature Curtain PIR Motion Detector

Spy 4 is the world's smallest detector offering inconspicuous curtain protection for corridors, passageways, doors and windows as well as support for access control, CCTV and various other control applications. It can be flush-mounted in a wall or ceiling or installed from behind the wall or the ceiling, providing a solid-curtain coverage of up to 2m width x 4m height (6 x 12ft).

1035 Series Miniature Self-Adhesive from GE Interlogix

Sentrol's Surface Mount Self-Adhesive Contact saves installation time through the use of a specially formulated 3m® adhesive tape. The tape, which establishes a permanent bond between the contact and the surface, can be repositioned during the first 5 minutes. A low profile and small footprint combine with reliable Sentrol technology to make this series the perfect magnetic contact for those situations where drilling holes is impractical.

• Ideal for residential and commercial
• Convenient surface mounting; combo head screws for quick termination
• Modern, low-profile design
• Private labeled, snap-on cover
• Angled clamping terminals for fast and easy lead connection
• White

The Sentrol Roller Plunger contacts save installation time while providing reliable magnetic contact security. The contact switch is activated when the door opens, releasing the tension on the wheel plunger. Drill only one hole to mount the roller plungers; the entire magnetic contact is housed in a economical single unit. Recessed mounting hides the contact within the frame of the door it protects.

GE Security 1125T 3/8" dia. Stubby Press Fit Contacts with Screw Terminals

The Sentrol "Stubby" Press Fit magnetic contact is a 3/8" dia. switch designed specifically for applications where space is limited. The short length makes it ideal for thin framed windows and doors where longer units cannot be used. Press fit ribs on the housing make for quick, easy installation.

GE Security 1275 3/8" dia. Wing Fit Magnetic Contacts

The Sentrol 3/8" diameter Wing Fit magnetic contact is ideal for new construction applications, where wood swell poses a potential threat to the contact housing. The "wings" flex to hold the contact securely in place as the wood expands and contracts.

IntelliSense FG-1625 Glassbreak Detector

IntelliSense FG-1625F Flush Mount Glassbreak Detector

The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.

IntelliSense FG-1625R Glassbreak Detector

The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

Honeywell FG1625RFM Glass Break Detector, Round, Flush Mount

The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG701 Glassbreak Simulator.