Cartell CT-2B Control Unit

This control unit has a single timed output and simplified features. Field adjustments include relay time and probe sensitivity.

Cartell CT-2BG Control Unit

This control unit is identical to the CT-2B except that the circuit board is conformal coated and thereby resistant to moisture. It can be installed in unheated, weatherproof applications such as barns, garages, and gate operators. The "G" was added to its name because it is a favorite product among the gate industry as a free-exit system for use with automatic gates.

Cartell CT-3B Control Unit

Cartell CF-2C Driveway System: Sound & Lights

This control unit with dual timed output includes floodlight control with full features. Field adjustments include: entry delay, floodlight time, exit delay, photocell sensitivity, re-trigger hold-off, annunciator time, probe sensitivity, and transient suppressor.

CT-6 Sensor Probe - Cartell

Sensor probe with custom length of CT-5 cable attached at the factory. Conduit not necessary.

Cartell CT6300 Driveway Sensor Probe w/ 300 ft Cable

Sensor probe with custom length of CT-5 cable attached at the factory. Conduit not necessary. Attached cable in 50 ft. increments up to 500 ft.; in 100 ft. increments from 500 ft. up to 3,000 ft. Use with CT-2B, CT-2BG, and CF-2C Control Units.

DA-500 The Drive-Alert Driveway Alarm

The DA-500 Drive-Alert Driveway Alarm System is the security industry's most-often used method for detecting a vehicle when it enters a driveway. A variety of features and options make this unit ideal for both residential and commercial applications.

• Control panel
• Internal Alarm Whistle
• DA-051-100 Sensor with 100 ft of cable
• Sensors with longer lengths of cable are available

DA-503 Drive-Alert Driveway Alarm

New Model - More Features and Easier to Install

The New DA-503 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-503 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.

The DA-503 can be ordered as a complete unit which includes a control panel, 1 DA-058 Remote Chime, and 1 sensor with 100 feet of cable. Any number of chimes may be used and longer lengths of cable are available. See our accessories section for details.

• Control panel
• DA-058 Remote Chime
• DA-051-100 Sensor with 100 ft. of cable
• Sensors with longer lengths of cable are available

DA-504 Drive-Alert Driveway Alarm

The New DA-504 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-504 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes and turns on lights when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.

P8000C Complete Directional Probe System - Sure Action

Sure Action's Directional Probe provides an installer with flexibility. By installing this probe, an installer can have lights turn on and a chime sound when a car enters a driveway, but only have the lights turn on as the car leaves the home. Or a gate may be triggered to open. The directional probe can also be used on long driveways to trigger lights so that only sections of the driveway are lit as a car enters and leaves.

Kit Includes:

• P8000 Directional Processor
• 212 Directional Probe with 5 ft. of burial cable
• 12VDC Power Supply
• N3 Box
• Electronic Chime on Plate with On/Off Switch
• Splice Kit

212 Processor for Directional Probe - Sure Action

Processor for the Directional Probe System. Handles up to (1) P8000 Directional Probe or (2) P5050 Standard Probes. Also has a circuit for an optional lightning check probe. Operating voltage is 12 VDC.

P8000 Directional Probe - Sure Action

P5050 Probe - Sure Action

VAL-1 Vehicle-Alert Standard System

The model VAL-1 operates on 10-14 VDC and has (2) SPST relay outputs that can be connected to alarm panels, bells, dialers, etc. Unit also includes internal alarm buzzer with silence switch.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.

Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’.