|
Water Resistant D&D is made for harsh environments.
Crow's Daredevil is so smart that it can actually tell the difference between a small animal and a genuine intruder. It's Double Dual™ optic system simulates 3D stereo vision so it "sees" a wider area and focuses only on real intruders. It's ASIC technology controls the Daredevil™ elements with supreme accuracy and reliability, and is especially suited for harsh environments.
The D&D's Double Dual™ Optic System is controlled by a powerful microprocessor which uses Crow's proprietary digital signal analysis to produce a three-dimensional thermal image of the protected area. It remembers this image and focuses only on the intruder. It will automatically adapt to environmental changes in wind, temperature and background noise. When conditions change, the D&D's compensation circuitry automatically adjusts itself to the new conditions, maintaining sensitivity level and detection capability with virtually no false alarms.
The security logic for the D&D is embedded in the ASIC (Application Specific Integrated Chip) component and it can not be violated or decoded, making it perfectly suited for high security applications.
The D&D is available with the standard wide angle lens or optional long range and vertical barrier lenses (see array diagrams); all are interchangeable. The D&D's water resistant case is especially suited for harsh environments.
Virtually No False Alarms
- Focuses on real intruders - not your pet
- Ignores cats, mice, birds, & insects
Made For Harsh Environments
- Water Resistant
- Automatically adapts to changes in wind, temperature and background noise
Greater Security
- Advanced ASIC technology
- Greater EMI and RFI protection
Specifications
- Detection Method: 2 matching dual elements/optics - Passive infrared
- Detection Speed: 0.5 to 6 ft/sec (0.15 to 1.8 m/sec)
- Sensitivity: 2ºF at 3 ft/sec (1.1ºC at 0.9 m/sec)
- Warm up period: 3 sec
- Alarm period: 2 sec
- Power input: 7.8-16 VDC
- Current draw: 8.4 mA between 7.8 and 16 VDC
- Alarm output: N.C 28 VDC 0.1A with 10 Ohm series protection resistor
- Tamper switch: N.C 28 VDC 0.1A open when cover is removed
- Automatic Temperature compensation: Constant gain at -4ºF to +158ºF (-20ºC to +70ºC)
- Humidity: Up to 95% R.H. non-condensing
- RFI protection: 30V/m 10-1000 MHz
- EMI protection: 50,000 V of electrical interference from lightning or power through
- Operating Temperature: -4ºF to +158ºF (-20ºC to +70ºC)
- Visible light protection: Stable against halogen light at 3.3 ft (1m)
- Lenses: Wide angle, long range, vertical barrier (curtain) - Interchangeable
- Dimensions: 5.4" (137 mm) x 3.4" (85 mm) x 1.7" (43 mm)
- Weight: 5.32 oz (150gr.)
Additional Information
|
