Cartell FC-9 Annunciator Plate: 4 buttons

This is an annunciator plate with a piezo-type Mallory Sonalert audible signal device and volume control. The volume control can also be used to turn the Sonalert off. Push button functions on the faceplate include: manual on, reset, and exit delay (see below for description of each). Matches any decor.

• Includes set of screws.
• Use with CF-2C Control Unit only.
• Sounds when a vehicle passes probe.
• No vehicle enters undetected.
• Neutral color of durable plastic matches any decor.
• Added features for convenience.
• Annunciator and pot assembled to decorative, flush mounted plate.
• Volume control includes ability to turn off sound.
• Circuit board w/ screw terminal hook up.
• Decorative cover conceals screws.
• Full-function annunciator with three added features when used with CF-2C control unit (see below).

MANUAL ON: This function allows the customer to turn on his/her floodlights when going out at night with a simple push-button switch on the annunciator plate mounted on the wall. No more walking in darkness to get into the car! The lights will be turned off by the control unit after an adjustable amount of time.

RESET: This function allows the customer to manually turn off the floodlights upon entering the home before they time out. This conserves energy and saves the customer utility money.

EXIT DELAY: This function allows the customer to keep the unit from tripping for an adjustable amount of time. With a simple push of the button on the annunciator plate, a person can turn off the sensor probe and drive by it without tripping the system. For example, if one were to leave the house later at night, he/she can use this function to turn the probe off and not awaken the sleeping family in the home when he/she drives by the probe.

Specifications

• Power Required: 10 to 20 VDC
• Alarrm Current: 20 mA maximum
• Temperature Range: 0 F - 140 F
• Dimensions: 4 1/2 in. x 3 in. x 1 in.
• Weight: 1 lb.
• Maximum volume: 70 dB

Cartell CF-2C Driveway System: Sound & Lights

This control unit with dual timed output includes floodlight control with full features. Field adjustments include: entry delay, floodlight time, exit delay, photocell sensitivity, re-trigger hold-off, annunciator time, probe sensitivity, and transient suppressor.

Cartell CT-2B Control Unit

This control unit has a single timed output and simplified features. Field adjustments include relay time and probe sensitivity.

Cartell CT-2BG Control Unit

This control unit is identical to the CT-2B except that the circuit board is conformal coated and thereby resistant to moisture. It can be installed in unheated, weatherproof applications such as barns, garages, and gate operators. The "G" was added to its name because it is a favorite product among the gate industry as a free-exit system for use with automatic gates.

Cartell CT-3B Control Unit

CT-6 Sensor Probe - Cartell

Sensor probe with custom length of CT-5 cable attached at the factory. Conduit not necessary.

Cartell CT6300 Driveway Sensor Probe w/ 300 ft Cable

Sensor probe with custom length of CT-5 cable attached at the factory. Conduit not necessary. Attached cable in 50 ft. increments up to 500 ft.; in 100 ft. increments from 500 ft. up to 3,000 ft. Use with CT-2B, CT-2BG, and CF-2C Control Units.