| Fire Alarm Systems > Wheelock Signals Communication Systems > Audible and Strobe Appliances |  |
|
| ||
Wheelock Audible and Strobe Appliances | ||
| ||
NS Horn Strobe & NH Horn Appliances |
|
Series NS |
Series NH |
 |
 |
|
Series NS Horn Strobes & Series NH Horn Appliances are ideal for wall mount designs that require 2 wire installation and 2 selectable dBA settings (90 & 95). Strobe Options:
Features:
|
Synchronize strobe and audible with Wheelock SM, DSM
Sync Modules or PS-12/24-8CP and PS-12/24-8MP
Power Supplies with built-in sync protocol
AS Horn Strobe & AH Horn Appliances |
|
Series AS |
Series AH |
 |
 |
|
Series AS Audible Strobe & Series AH Audible Appliances are ideal for 2 wire applications with 3 selectable dBA settings (90, 95, 99) and wall or ceiling mounting. Strobe Options:
Features:
|
Wheelock AH-12-R Horn Red
|
The AH-12 Horn is ideal for wall or ceiling mount designs that require 2 wire installation and 3 selectable dBA settings (90, 95 & 99). Features:
|
Wheelock AH-12-W Horn White
|
The AH-12 Horn is ideal for wall or ceiling mount designs that require 2 wire installation and 3 selectable dBA settings (90, 95 & 99). Features:
|
Wheelock AH-12WP-R Outdoor Horn
|
The AH-12WP-R Horn is ideal for outdoor wall or ceiling mount designs that require 2 wire installation and 3 selectable dBA settings (90, 95 & 99). Features:
|
| Series HS4 Horn Strobe & Series HS Horn Appliance | |
 |
 |
| Series MT & MT Strobe Multitone Electronic Appliances | |
 |
 |
Strobe Options:
- Single Candela: 1575 cd (MT)
- Outdoor (UL 1638): 180 cd (MTWP)
- 115 VAC (UL 1638): 15 cd (MT4)
-
- Choice of eight (8) alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren, or Hi/Lo
- Audible and strobe can operate from a single NAC circuit with any of the eight audible sounds
- MT and MTWP Strobes can be Synchronized with Wheelock SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series AMT & AMT Strobe Multitone Electronic Appliances | |
| AMT Strobe | AMT No Strobe |
 |
 |
Strobe Options:
- Single Candela Wall: 1575 cd
- Choice of eight (8) self-prioritized sound combinations
- Three electrically isolated audible signal inputs
- Each AMT Audible and AMT Strobe appliance has two selectable sound output levels: Up to 98 dBA at 10 feet on the high setting and up to 93 dBA on the standard setting
- AMT with strobe can flash independently or in unison with all audible signals
- AMT Strobes can be Synchronized with Wheelock SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series MIZ Piezoelectric Mini Horns | |
 |
 |
Features:
- Continuous or Code 3 output
- Synchronize with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
- Mount to single-gang boxes
| Series RSS Strobes & RSSP Strobe Plate Appliances | ||
| RSS - round | RSS - square | RSSP |
 |
 |
 |
Strobe Options:
- Single Candela: 1575 cd (wall), 75 cd (weatherproof)
- Multi Candela Field Selectable
- Wall: 15/30/75/110 cd or 135/185 cd
- Ceiling: 15/30/75/95 cd or 115/177 cd
- Patented Universal Mounting Plate
- Low current draw to reduce power consumption and wiring costs
- Strobes produce 1 flash per second over the regulated voltage range
- Synchronize with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
Wheelock RSS-121575W-FR Strobe Appliance Red
|
The RSS-121575W-FR Strobe Appliance provides multiple, field selectable intensity options Features:
|
Synchronize strobe and audible with Wheelock SM, DSM Sync Modules or PS-12/24-8CP
and PS-12/24-8MP Power Supplies with built-in sync protocol
Wheelock RSS-121575W-FW Strobe Appliance White
|
RSS-121575W-FW White Strobe Appliance Features:
|
Synchronize strobe and audible with Wheelock SM, DSM Sync Modules or PS-12/24-8CP
and PS-12/24-8MP Power Supplies with built-in sync protocol
Wheelock RSS-24MCCH-FW Strobe Appliance
|
RSS-24MCCH-FW White Strobe Appliance Features:
|
Synchronize strobe and audible with Wheelock SM, DSM Sync Modules or PS-12/24-8CP
and PS-12/24-8MP Power Supplies with built-in sync protocol
Wheelock RSSP-121575W-FR Strobe Appliance
|
RSSP-121575W-FR Strobe Plates are designed for retrofitting existing audible notification appliances to strobe applications. Features:
|
Synchronize strobe and audible with Wheelock SM, DSM Sync Modules or PS-12/24-8CP
and PS-12/24-8MP Power Supplies with built-in sync protocol
Wheelock RSSP-241575W-FR Strobe Appliance
|
RSSP-241575W-FR Strobe Plates are designed for retrofitting existing audible notification appliances to strobe applications. Features:
|
Synchronize strobe and audible with Wheelock SM, DSM Sync Modules or PS-12/24-8CP
and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series CH Chimes & Chime Strobes | |
 |
 |
Strobe Options:
- Single Candela Wall: 1575 cd
- Multi Candela Field Selectable
- Wall: 15/30/75/110 cd or 135/185 cd
- Ceiling: 15/30/75/95 cd or 115/177 cd
- Anechoic sound level adjustable up to 83dB
- Tone adjustable from 800 to 1200 Hz
- Adjustable volume and tone control
- CH Strobes may be Synchronized with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series MB Motor Bells |
 |
Features:
- Available in 6” and 10” sizes in 12 or 24 VDC models.
- For combined audible (bell) and visual signaling, convenient retrofit assemblies (Series RSSP) are available with multi-candela or 1575 cd strobes
- Built-in trimplate make semi-flush mounting simpler and less expensive
Wheelock MB-G6-12-S Motor Bell
Cooper Wheelock MB-G6-12-S Motor BellThe Wheelock Series MB Motor Bells provide a better engineered motor bell for fire and life safety alarm systems. The Wheelock Series MB Bells include higher dBA, low current draw, built-in trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB Bells is a durable, high torque permanent magnet motor selected for its high performance and long life. |
| Series 43T AC Vibrating Bells |
 |
Features:
- Available in 6” and 10” sizes
- 115 or 24 VAC operation
| Series 31T 115 VAC Horn |
 |
Features:
- Offers rugged, vandal resistant construction with die cast metal housings for the horn and mechanism
| Series CVX/CSX Explosion Proof Bells | |
| Series CVX10, CSX10(Indoor Model) | Series CVXG10, CSXG10 (Outdoor Model) |
 |
 |
Features:
- Available in 24 VDC and 115 VAC models
- Available in single stroke and vibrating models
- High sound output with large 10” bell shell
- Approvals: Underwriter’s Laboratories (UL), New York City (MEA), California State Fire Marshal (CSFM)
| Weatherproof Series AHWP Audibles, ASWP Audible Strobes, MTWP Multitone Strobes, RSSWP Strobes & ET70WP Speaker Strobes Appliances |
Features:
- Synchronize with Wheelock’s SM, DSM sync modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol (NotMT-12/24 or audible portion of MTWP)
- Strobe models are rated 180 cd @ 77°F
| Series E50 Speakers & Speaker Strobes |
Strobe Options:
- Single Candela 1575 cd
- Multi Candela Field Selectable 15/30/75/110 cd or 135/185 cd
- Mount to 4” square x 2-1/8” deep backbox with no extension ring required
- High efficiency design for maximum output at minimum wattage across a listed frequency range of 400 to 4000 Hz
- Strobes may be synchronized with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series E Low Profile Speakers & Speaker Strobes |
Strobe Options:
-
Wall Mounts:
- Single Candela 1575 cd
- Multi Candela Field Selectable 15/30/75/110 cd or 135/185 cd
Ceiling Mounts
- 15/30/75/95 cd or 115/177 cd
- High efficiency design for maximum output at minimum wattage across a listed frequency range of 400 to 4000 Hz
- Strobes may be synchronized with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with built-in sync protocol
| Series ET Speakers & Speaker Strobes |
Strobe Options:
-
Wall Mounts:
- Single Candela 1575 cd
- Multi Candela Field Selectable 15/30/75/110 cd or 135/185 cd
Ceiling Mounts
- 15/30/75/95 cd or 115/177 cd
- High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 Hz
- Synchronize with Wheelock’s SM, DSM Sync Modules or PS-12/24-8CP and PS-12/24-8MP Power Supplies with builtin sync protocol
| Series ET-1010 & ET80 Vandal Resistant Speakers & Speaker Strobes | |
 |
 |
Strobe Options:
-
Wall Mounts:
- Single Candela 1575 cd
- Multi Candela Field Selectable 15/30/75/110 cd or 135/185 cd
- High efficiency design for maximum output at minimum wattage across a listed frequency range of 400 to 4000 Hz
- SLM Strobes may be synchronize with Wheelock’s SM, DSM Sync Modules or PS-12/24-8MP Power Supply with built-in sync protocol
- Sealed back speaker construction for extra protection and improved audibility
| Series S UL Listed 8” Speaker & Speaker Strobe |
- S8-70/25 Dual voltage, multi-tap speaker
- S8-24MCC Speaker with field selectable candela settings of 15/30/75/95cd
- S8-24MCCH Speaker with field selectable candela settings of 115/177cd
Features:
Speaker and Speaker Strobes:
- Dual voltage transformer (25/70V)
- Jumper selectable multiple wattage taps: 1/8, ¼, ½, 1, 2, 4, 8
- 93 dBA @ 8 watts of source power
- Frequency Response: 200Hz – 15kHz 400Hz – 4kHz (UL)
- Magnet weight: 9.5 oz.
- Speaker impedance: 8 ohms
- Round metal 12" grille, with white powder coated finish
- Compatible with DC circuit supervision
- UL Listed under Standard 1480
Speaker Strobes Only
- Synchronized or non-synchronized strobe capability
- Xenon flashtube with solid state circuitry enclosed in a rugged Lexan® lens
- Field selectable candela settings
- UL Listed under Standard 1971
| Series STH-15S Supervised Horn Loudspeaker |
Features:
- Approvals Include: UL Standard 1480 – (Speakers for Fire Protective Signaling Systems), California State Fire Marshal (CSFM)
- 15-Watt High Efficiency Compression Driver
- Weather-resistant, vandal-resistant aluminum construction assures protection against water, humidity, vermin, and corrosion
- Reentrant acoustic path
- 25/70/100V transformer featuring a screwdriver adjustable, 7 position watt/impedance selection switch
- 5 mfd Capacitor for Line Supervision
- Universal-mounting bracket
- Installation terminals and power selector are recessed mounted, and protected by the metal interface adapter, or clear plastic shield
| Series SM & DSM Synchronization Modules |
Features:
- 3 ampere per circuit current handling at 12 or 24 VDC
- Low operating current draw
| POWERPATH™ Series PS-12/24-8CP and PS-12/24-8MP Power Supply/Chargers |
- System provides either 12 or 24 VDC inputs and 12 or 24 V outputs
- Not battery dependent - full 8A even if battery is degraded
- Class 2 rated power limited outputs
- Thermal and short circuit protection with auto reset
- Patented built-in synchronization mode to operate all of Wheelock’s Synchronized Notification Appliances Auxiliary Power
- Up to 200mA continuous with PS-12/24-8CP
- up to 3.5 Amps nonalarm with PS-12/24-8MP (e.g. door holders)
| Series MPS Manual Pull Stations |
Features:
- Single or Dual action
- Key Reset
- Terminal Strip Connections
- Corrosion resistant, gold plated SPST contacts
- Mounts on single gang backbox
- Surface and Weatherproof backboxes available
- High-gloss red enamel finish with raised white lettering
- Approvals Include: Ul Standard, Factory Mutual (FM), California State Fire Marshal (CSFM) and New York City (MEA)
SAFEPATH®4 Multi-Function Facility Communications System |
|
SP40/2 Outside Panel |
SP40/2 Inside Panel |
 |
 |
|
SAFEPATH®4 Multi-Function Facility Communications System The SP40/2 is a Multi-Function Supervised Paging, Messaging, Background Music and Emergency Voice Evacuation System with 24 VDC battery backup. This single channel system is capable of delivering 40 watts of supervised high fidelity audio power and 2 amps of supervised 24 VDC synchronized strobe power. Features:Approvals & Compliance
|