Altronix 6030 Timer- Bell Cut-Off 6VDC or 12VDC, 5 Amp

6062 Multi-Purpose Timer
With Enhanced features (Replaces Models 6060 and 6060-24)

Model 6062 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher. A new feature has been added which provides a momentary relay activation at the end of a desired timing cycle. This feature eliminates the need for having to use two (2) timers to achieve this function. Another new feature will cancel (interrupt) timing cycle and reset timer if desired.

ACM8 Access Power Controller

Altronix ACM8 distributes one (1) 12 to 24 volt AC or DC input over eight (8) independently controlled fuse protected outputs. The outputs can also be coofigured as dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. It will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both fail-safe and fail-secure modes. The ACM8 is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, HVAC Shutdown, Elevator Recall or maybe used to trigger other auxiliary devices.

The fire alarm disconnect can be configured for the following modes; a) Eight (8) outputs affected or b) Four (4) outputs affected and four (4) outputs unaffected (50/50 mode).

Altronix ACM8 Auxiliary Module- Eight (8) Fuse Protect

Altronix ACM8CB Auxiliary Module- Eight (8) PTC Protec

Altronix ACM8CBE Auxiliary Module- Eight (8) PTC Relay

Altronix ACM8E Auxiliary Module- Eight (8) Fused Relay

Altronix AL100UL Linear Power Supply/Charger

Model AL100UL power supply converts 16.5VAC/20VA input to a 12VDC power limited output.

AL400ULX UL Listed, Multi-Agency Approved Power Supply/Charger

The AL400ULX power supply converts a 115VAC / 60Hz input, to a 12VDC or 24VDC power limited output, (see specifications). The AL400ULX is UL Listed for fire alarm, burglar alarm, and access control applications.

AL624 Linear Power Supply / Charger
(Replaces models AL612 and AL1224)

The AL624 Linear Power Supply/Charger converts low voltage AC input into 6VDC or 12VDC @ 1.2 amp or 24VDC @ 750 mA of continuous supply current. This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Altronix ALSD1 Siren Driver- 6VDC to 12VDC operation,

ALSD1 Siren Driver

The ALSD1 is a high output very low current draw dual channel siren driver designed to work with alarm panels with limited current capability.

Altronix ALSD2 Siren Driver- 6VDC to 12VDC operation,

ALSD2 Siren Driver

The ALSD2 is a high output very low current draw dual channel siren driver designed to work with alarm panels with limited current capability.

AT4 Annual Event Timer

Model AT4 is an extremely versatile 24 Hour 365 Day Event Timer designed to support a wide range of applications. Such applications include: Home and Building Automation, Security, Access Control, Lighting Control, Etc.

AT4 is equipped with four independently controlled form "C" relay contacts that provide many latching and/or momentary operations during a program schedule of your choice. The EE prom memory allows for programming of unit prior to/or during field installation. Events may be set for single or multiple operations on a daily and/or weekly schedule. The block programming feature enables repeating an event on any combination of consecutive days. AT4 will compensate for daylight savings time if desired. It automatically adjusts for leap year and is Y2K compatible. Individually selected holiday exceptions can be programmed to over-ride regularly scheduled events.

Altronix AT4 Timer- Digital Annual Timer. 254 individu

Altronix AT4B Timer- Digital Annual Timer Board. 254 i

Altronix BC100 Enclosure- Battery enclosure. grey fini

Altronix BC1240 Enclosure- Heavy Duty Battery enclosur

Altronix BC200 Enclosure- Battery enclosure with shelf

Altronix BC300 Enclosure- Battery enclosure with shelf

Altronix BC300R Enclosure- 19 gauge red enclosure with

Altronix BC400 Enclosure- Large Battery enclosure, cam

Altronix BC400R Enclosure- Large Battery enclosure, ca

Altronix BC400SG Enclosure- Large Battery enclosure, c

Altronix BC400SR Enclosure- Large Battery enclosure, c

Altronix BC500 Enclosure- Heavy Duty Battery enclosure

Altronix BC600 Enclosure- Jumbo Battery enclosure, cam

Altronix BC800 26"H x 19"W x 6.25"D Expandable Access/

Altronix BCS4G Battery shelf for BC400G

Altronix BCS4R Battery shelf for BC400R

Altronix BL2 Hardware- 8" pair Red / Black Battery lea

Altronix BL3 Hardware- 18" pair Red / Black Battery le

Altronix BL4 Hardware- 8" Yellow Battery jumper lead

Altronix BT1212 Battery- 12VDC/12AH,For use with Power

Altronix BT124 Battery- 12VDC/4AH, For use with Power

Altronix BT1240 Battery- 12VDC/40AH,For use with Power

Altronix BT126 Battery- 12VDC/7AH, For use with Power

Altronix CAB4 Enclosure- 19 gauge red enclosure with a

Altronix CAM1 Hardware- cam lock w/ mounting hardware

Altronix CP1 Hardware- Conversion plate for mounting 2

Altronix D10 DIN rail pre-cut to 10" length for mounti

DL1 Door Control Timer

Specifications:

• 12 - 24 volt AC or DC operation.
• Dry relay output (1 form "C" contact, rated @ 2 amps).
• Isolated AC or DC voltage 3V-24V trigger.
• Time adjustable from 1 second to 1 minute.
• 12VDC regulated beeper output.
• Momentary or maintained trigger.
• Board dimensions: 4"L x 1.5"W x .75"H

Altronix DL1 Timer- Door Control Timer, 12 to 24 Volt

DL3 Door Control Timer

Specifications:

• 12 - 24 volt AC or DC operation.
• DC "NC& and &NO" outputs to use with door magnet or door strike.
• Isolated AC or DC voltage 3V-24V trigger.
• Time adjustable from 1 second to 1 minute.
• On-board sounding device.
• Momentary or maintained trigger.
• Board dimensions: 4.5"L x 1.31"W x .75"H

Altronix DL3 Timer- Door Control Timer w/ sounder, 12

Altronix DP4 DIN Rail Mountable Power Distribution Boa

Altronix DPS1 DIN Rail Mountable Power Supply / Charge

DPS1 Power Supply / Charger

DPS1 power supply/charger converts low voltage AC input into 6VDC or 12VDC @ 1.2 amps or 24VDC @ 750mA of continuous supply current (see specifications). This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Altronix DPS3 DIN Rail Mountable Power Supply / Charge