Intercom Systems > Aiphone Intercom Systems > LEF Open Voice Intercoms
LEF Open Voice Intercoms

Aiphone LEF Open Voice Intercoms

Features
  • Flexible system design, intermixing any number of masters and subs to the system's capacity
  • Selective calling from any master, with hands free reply from sub or responding master.
  • Room monitoring from a master station.
  • PanTilt video door answering can be added.
  • Selective door release (LEF-5, 10 and 10S), with RY-PA relays.
  • All Call (LEF-10S), door chime and background music input with BG-10C and PS-1225UL.
  • Use QuikSpec to design this system.
  • Troubleshooting FAQ's for the LEF System
  • Literature Available
Specifications
    Power Source 12V DC, 300mA per station. *Use PS-1225UL power supply.
    Communication Subs call in with call tone and LED, 20 sec.
    Depress station button with lit LED. Press to talk, hands free reply.
    No LED annunciation between masters.
    Hands free reply from responding master.
    *800mW receive at 20ohms. 500mW transmit at 20ohms.
    Door Release Button Contact 30V DC, 0.1A (resistance load).
    Selector Switch Contact 12V DC, 300mA.
    Wiring Use shielded multi-conductor wire, not twisted pairs.
    2 conductors per sub, homerun (single master system), or 3 conductors per sub (multi-master system). (Use Aiphone #822202 or #822203.)
    LEF-3 requires 9 conductors between masters. (Use Aiphone #822210.)
    LEF-5 requires 12 conductors between masters (plus up to 5 for video/door release controls). (Use Aiphone #822212 or greater.)
    LEF-10 requires 17 conductors between masters (plus up to 10 for video/door release controls). (Use Aiphone #822220.)
    LEF-10S requires 20 conductors between masters (plus up to 20 for video/door release controls). (Use Aiphone #822220.)
    Distance 650' with 22AWG, 1600' with 18AWG.

LE-SSV Vandal Resistant Sub Station with Pinhole Camera

LE-SSV Vandal Resistant Sub Station with Pinhole Camera

LE-SSV Vandal Resistant Sub Station with Pinhole Camera

Aiphone LE-SSV Vandal Resistant Sub Station with Pinhole Camera

The LE-SSV is a 2-gang stainless steel vandal proof and weather resistant sub station designed for use with the systems listed above. It is constructed of 12 gauge stainless steel and has a stand alone camera built in. The unit either flush mounts into a 2-gang box, or surface mounts using the SBX-2G. Each unit includes a 12V DC power transformer for the camera, tamper proof screws, and a tool for installation.

Specifications
  • Audio Power Source: Supplied by master station
  • Speaker: 20 ohms, 4W, 2" diameter, water proof and puncture resistant, 2.4 oz. magnet
  • Call Button: SPST call button, momentary activation. Limited stop button
  • Call Annunciation: Call tone rings at master as long as button is held down. LED will remain lit for approx.
  • 20 seconds (LEF, LEM-3, MP-3S, AP-5/10M only). Call tone only on LEM-1DL, LEM-1, and MP-1S.
  • Communication: Hands free at sub. Master is push-to-talk, release-to-listen.
  • Video Output: 75 Ohm / 1Vp-p composite video
  • Iris Control: Auto
  • Minimum Illumination: 1.0 lux
  • Effective Picture Element: 512x492 NTSC
  • Lens Mount 3.7mm Cone Pinhole Lens
  • Camera Power Source: 12V DC, 100mA (via included power supply)
  • Faceplate: 12 gauge stainless steel
  • Mounting: Flush mount into a 2-gang box (minimum 2-¼" depth) or surface mount into SBX-2G (sold separately)
  • Tamper proof screws included (6x32 for use with flush 2-gang box) with T-10 TORX bit
  • When using SBX-2G, use the hardware included with that unit.
  • Terminations: Color-coded prewired pigtails. Red wire = "1"; Black wire = "E"; Green wire = negative;
  • Red connector = 12VDC power; Yellow connector = 75 Ohm / 1Vp-p video output (BNC).
  • Operating Temperature: 14ºF ~ 140ºF
  • Audio Wiring: 2 conductors in a 1-master LEF, MP-S, or AP-M system. 3 conductors in a multi-master LEF system.
  • Shielded cable is recommended. Use Aiphone #822202 for LEM or MP-S. Use #822202 or #822203 for LEF. Use #832202 for AP-M systems.
  • Audio Wiring Distance: See system that unit is being used with for distance specifications.
  • Video Wiring: Independent BNC connection from substation pigtail to destination video device.
  • Dimensions (H x W x D): LE-SSV alone: 4-11/16" x 4-11/16" x 2"
  • With SBX-2G: 4-3/4" x 4-7/8" x 3-5/8" (Top) 2-3/8" (Bottom)



Product #AJ-LESSV
Price: US $9.95
QTY




Related Products