5800SS1 Wireless Shock Sensor

The 5800SS1 Wireless Shock Sensor mounts directly on glass surfaces. It provides excellent detection for all types of glass while eliminating false alarms. It is intended for use with ADEMCO’s 5800 wireless systems only. The 5800SS1 is especially effective in acoustically hard, reverberant rooms like kitchens, bathrooms and laundry rooms that are prone to false alarms. Since it is a shock sensor, the 5800SS1 is immune to the sounds that cause false alarms. Installation is a snap, just pull the battery tab to enroll the transmitter, peel the adhesive backing and mount. There’s no need to open the case for any reason except to change the battery years later.

5819 Shock Processor and Transmitter

• Provides three zones for total protection
  - Closed loop shock sensing and processing
  - External contact loop
  - 2 built-in reed switches for vertical or horizontal mounting
• Adjustable pulse count and response sensitivity settings to meet demanding application requirements
• Includes replaceable lithium batteries

Note: Requires ASC-SS1 Shock Sensor

5853 Wireless Glassbreak Detector

ADEMCO’s 5853 Wireless Glassbreak Detector offers uncompromised performance and unmatched false alarm immunity. The FlexCore™ signal processor utilizes an Application Specific Integrated Circuit (ASIC)—processing sound data in parallel rather than sequentially. This permits sound frequency, duration and amplitude to be analyzed 50% faster to minimize false alarms while maintaining the highest possible level of detection. The 5853 can be mounted on any wall or ceiling within a 25’ range, with no minimum range limitation. The LEDs indicate test mode, alarms and trouble conditions. It is compatible with all 5800 series wireless devices.

5890 Wireless PIR motion detector

• 40' x 56' coverage
• Wireless operation for fast installation
• For use with Q.E.D. control panels only
• Tampered cover - unit transmits if cover removed
• Up to 5 year battery life

5890PI Wireless PIR Motion Detector with Pet Immunity

• 35' x 45' (10.6m x 13.7m) coverage pattern
• Immune to pets up to 40 lbs.
• Split-Zone Optics technology
• For use with Q.E.D. control panels only
• Up to 5 year battery life

Ademco 5809 Wireless Rate-of-Rise 135-Degree Heat Detector

ADEMCO’s 5809 wireless fixed heat and rate-of-rise temperature sensor offers expanded fire detection and installation flexibility. It is ideal for hard to wire locations and applications that require more than smoke detection. With no wires to run, the 5809 is fast and easy to install.

Honeywell / Ademco 5800WAVE Wireless Siren

Honeywell's 5800WAVE is a fully wireless siren that provides periodic status information and battery back up for an added level of performance and protection. The flexible design simplifies installation, saves time and installs in seconds at any location without the need to run wires.

Special order product.

5843 Wireless Switch Module from Ademco

ADEMCO is pleased to announce the release of the new 5843 Wireless Switch Module, a perfect accessory to any ADEMCO security system. The exciting new option provides additional revenue opportunity for our customers and a new level of convenience for homeowners.

The 5843 lets end-users control any momentary opening or closing with the same key fob used to control their security system. Up to eight wireless keys can be enrolled into the module for operating any relay-activated device. Ideal applications include lights, security gates, garage doors and more.

5869 Holdup Switch/Transmitter

The 5869 Holdup Switch/Transmitter is a finger-operated RF transmitting device. It is typically mounted under a counter or money drawer for inconspicuous operation. When the transmitter is activated, it emits an RF signal to the receiver. The security system control panel sends a burglary alarm to the central station when a RF signal is received from an enrolled Holdup Switch/Transmitter.

Once activated, the 5869 Holdup Switch/Transmitter can only be reset by the reset key. The 5869 also incorporates tamper switches that are activated when the cover is removed, or if the unit is forcibly removed from its installation location.